News

 Statistics

Number of Journals34
Number of Issues1,306
Number of Articles9,428
Article View9,191,918
PDF Download5,622,573
(2018). Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade. Electronic and Cyber Defense, 14(3), 19-28.
. "Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade". Electronic and Cyber Defense, 14, 3, 2018, 19-28.
(2018). 'Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade', Electronic and Cyber Defense, 14(3), pp. 19-28.
Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade. Electronic and Cyber Defense, 2018; 14(3): 19-28.

Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade

مکانیک هوافضا
Article 2, Volume 14, Issue 3, January 2020, Pages 19-28    PDF (1.07 M)
Receive Date: 08 January 2018,  Revise Date: 22 May 2019,  Accept Date: 19 September 2018 
Keywords
Convection; Channel; Computational Fluid Dynamics; Ribs; Heat transfer augmentation
References
  1. Kays, W.M. and London,A.L. “Compact Heat Exchangers”, McGraw-Hill, New York, United States, 1984.##
  2. Bergles, E. “Handbook of Heat Transfer”, McGraw-Hill, New York, United States, Third Edition, 1998.##
  3. Bergles, E.,Manglik,R.M. “Current Progress and New Developments in Enhanced Heat and Mass Transfer”, J. of Enhanced Heat Transfer, Vol. 20, No. 1, pp. 1-15, 2013.##
  4. Dipprey, D.F. “An Experimental Investigation of Heat and Momentum Transfer in Smooth and Rough Tubes at Various Prandtl Numbers”, Ph.D thesis, California institute of technology, United States, 1961.##
  5. Webb, R. L., Eckert, E. R. G. and Goldstein R. J. “Heat Transfer and Friction in Tubes with Repeated-Rib Roughness”, Int. J. Heat Mass Transfer, Vol. 14, pp. 601–617, 1971.##
  6. Han,J.C., Glicksman,L.R. and Rohsenow, W.M. “An Investigation of Heat Transfer and Friction for Rib-Roughened Surfaces”, Int. J. of Heat and Mass Transfer, Vol. 21, No. 8, pp. 1143–1156, 1978.##
  7. Han, J.C. “Heat Transfer and Friction Characteristics in Rectangular Channels with Rib Turbulators”, ASME J. Heat Transfer, Vol. 110, pp. 321–328. 1988.##
  8. Han,J.C., Zhang,Y.M. and Lee, C.P. “Augmented Heat Transfer in Square Channels with Parallel, Crossed and V Shaped Angled Ribs”, ASME J. Heat Transfer, Vol. 113, pp. 590–596, 1991.##
  9. Parson,J.A., Han, J.C. andZhang,Y.M. “Effects of Model Orientation and Wall Heating Condition on Local Heat Transfer in a Rotating Two-Pass Square Channel with Rib Turbulators”, Int. J. Heat Mass Transfer, Vol. 38, No. 7, pp. 1151-1159, 1995.##
  10. Greiner, M. “An experimental investigation of resonant heat transfer enhancement in grooved channels”, Int. J. Heat Mass Transfer, Vol. 34, pp. 1383-1391, 1991.##
  11. Bejan, A. and Kraus,A.D. “Heat Transfer Handbook”, John Wiley & Sons, New York, United States, 2003.##
  12. Elyyan,M.A., Rozati, A. and Tafti,D.K. “Investigation of Dimpled Fins For Heat Transfer Enhancement in Compact Heat Exchangers”, Int. J. Heat Mass Transfer, Vol. 51, pp. 2950-2966, 2008.##
  13. Patankar,S.V., Liu, C.H. and Sparrow, E.M. “Fully Developed Flow and Heat Transfer in Ducts Having Streamwise Periodic Variations of Cross Sectional Area”, J. Heat Transfer, Vol. 99, pp. 180-186, 1977.##
  14. Yongsiri, K., Eiamsa-ard, P., Wongcharee, K. and Eiamsa-ard, S. “Augmented Heat Transfer in a Turbulent Channel Flow with Inclined Detached-Ribs, Case Studies in Thermal Engineering”, Vol. 3, pp. 1-10, 2014.##
  15. Xie, G., Zheng, S., Zhang, W. and Sunden, B. “A Numerical Study of Flow Structure and Heat Transfer in a Square Channel with Ribs Combined Downstream Half-Size or Same-Size Ribs”, Applied Thermal Engineering, Vol. 61-2, pp. 289–300, 2013.##
  16. Xie, G., Liu, J., Ligrani,P.M. and Sunden, B. “Flow Structure And Heat Transfer in a Square Passage with Offset Mid-Truncated Ribs”, Int. J. of Heat and Mass Transfer, Vol. 71, pp. 44–56, 2014.##
  17. Moon, M., Park, M. and Kim, K.“Evaluation of Heat Transfer Performances of Various Rib Shapes”, Int. J. of Heat and Mass Transfer, Vol. 71, pp. 275–284, 2014.##
  18. Vhidifar, S. and Kahrom, M.“Experimental Study of Turbulent Layers with Different Obstacles to Stimulate Optimal Point Augmentation in Heat Transfer Coefficient”, Modarres Mechanical Engineering, Vol. 14, No. 3, pp. 43-50, 2014 (In Persian)##
  19. Joodaki, A. and Ashrafizadeh, A.“A New Geometrical Modeling Approach in the Analysis and Optimization of Convection Heat Transfer in Wavy Channels”, Modarres Mechanical Engineering, Vol. 14, No. 9, pp. 147-156, 2014 (In Persian)##
  20. Bhagoria, J.L., Saini, J.S. andSolanki,S.C. “Heat Transfer Coefficient and Friction Factor Correlations for Rectangular Solar Air Heater Duct Having Transverse Wedge Shaped Rib Roughness on the Absorber Plate”, Renew. Energy, Vol. 25, No.3, pp. 341–369, 2002.##
  21. Taslim,M.E. “Rib Fin Effects on The Overall Equivalent Heat Transfer Coefficient in a Rib-Roughened Cooling Channel”, Int. J. of Heat Exchangers, Vol. 4, pp. 25-41, 2005.##
  22. FLUENT web page, http://www.fluent.com/solutions, Accessed 8 November 2016.##
  23. Ferziger, J.H. and Peric, M. “Computationl Methods for Fluid Dynamics”, Springer, Berlin, Germany, 2000.##
Statistics
Article View: 625
PDF Download: 313