News

 Statistics

Number of Journals34
Number of Issues1,306
Number of Articles9,427
Article View9,189,269
PDF Download5,621,868
Roeentan, A. (2018). Application of nano-composite coating of epoxy-zinc oxide base as a suitable anti-fouling coating on high speed crafts. Electronic and Cyber Defense, 17(52), 14-19.
Abozar Roeentan. "Application of nano-composite coating of epoxy-zinc oxide base as a suitable anti-fouling coating on high speed crafts". Electronic and Cyber Defense, 17, 52, 2018, 14-19.
Roeentan, A. (2018). 'Application of nano-composite coating of epoxy-zinc oxide base as a suitable anti-fouling coating on high speed crafts', Electronic and Cyber Defense, 17(52), pp. 14-19.
Roeentan, A. Application of nano-composite coating of epoxy-zinc oxide base as a suitable anti-fouling coating on high speed crafts. Electronic and Cyber Defense, 2018; 17(52): 14-19.

Application of nano-composite coating of epoxy-zinc oxide base as a suitable anti-fouling coating on high speed crafts

دوفصلنامه مهندسی شناورهای تندرو
Article 2, Volume 17, Issue 52, December 2019, Pages 14-19
Author
Abozar Roeentan*
Receive Date: 12 February 2018,  Revise Date: 21 January 2019,  Accept Date: 02 January 2019 
Abstract
                One of the most important factors in reducing the operational capacity of high speed crafts in marine environments is the growth of mosses and sticky algae in the body of these crafts. This subject it increase the weight, the friction of the body surface with sea water and fuel consumption, the speed and power of maneuver. Today, many studies have been done to achieve an effective way of preventing moss clinging to vessels or minimizing them. The most common solution to tackling moss sticking to the walls of these structures is to create conditions that prevent moss sticking. One of these methods is to cover the surfaces with colors containing toxic substances. Toxic substances of anti-fouling tributyl Tin have a damaging effect on living organisms and living organisms in the sea. Today, due to environmental problems, the use of these materials is   prohibited as an anti-fouling coating. With the advent of nanotechnology, the way to develop anti-fouling coatings is more efficient and environmentally friendly. The use of epoxy-based nano-composite containing oxide nanoparticles on the body of crafts and various operational evaluations showed high performance of nano-composite coatings in preventing moss growth, and by overcoming the problems caused by moss growth, the operational capacity of crafts was significantly Improved.                                            
Keywords
Nanoparticles of zinc oxide; anti-fouling coating; nano-composite; high speed crafts
References

[1] Almeida, E. , and Sousa, O., “Marine paints: The particular case of anti-fouling paints (Review),” Progress in Organic Coatings, Vol. 59, 2007, pp. 2-20.                             

[2] Yebra, D. M., and Johansen, K. D., “Anti-fouling technology past, present and future steps towards efficient and environmentally friendly anti-fouling coatings (Review),” Progress in Organic Coatings, Vol. 50, 2004, pp. 75-104.

[3] Kiil, D., Yebra, D. M., and Johansen, K. D., “Marine bio-fouling protection: design of controlled release antifouling paints,” in Chemical Product Design: Toward a Perspective through Case Studies, 2007, pp. 181-237.

[4] Chambers, L. D., Stokes, K. R., Walsh, F. C., and Wood, R. J. K.,” Modern approaches to marine anti-fouling coatings, Surface & Coatings Technology, Vol. 201, 2006, pp. 3642-3652.                                                           

 [5] Walker, I., “The benefits of foul release coatings,”  Shipbuilding Technology, 2007, pp. 117-120.

[6] Clare, A. S., “Towards nontoxic anti-fouling1,” Marine biotechnology, Vol. 6, 1998, pp. 3-6.

[7] Ashe, B., “A detail investigation to observe the effect of zinc oxide and Silver nano-particles in biological system,” Master of Biotechnology and Medical Engineering, Department of Biotechnology & Medical Engineering National Institute Of Technology,” Rourkela-769008, Orissa, India, Jan., 2011.                                                     

 [8] Rajendran, R., Jayakumar, S., Vaideki, K., and Rajesh, E. M. “Use of zinc oxide nano-particles for production of antimicrobial textiles,” International Journal of Engineering Science and Technology, Vol. 2, 2010, pp. 202-208.

[9] Morris, R. S., “Zinc oxide photo active anti-foulant material,” US Patent, No. 5916947, 1999.     

[10] Brunet, L., Hotze, E. M., Alvarez, P. P. J., and Wiesner, M. R., “Comparative photo activity and antibacterial properties of C60 fullerenes and titanium dioxide nano-particles,” Environ. Sci. Techno, Vol. 43, 2009, pp. 4355-4360.

[11] Lam, S. M., Sin, J. C., and Mohamed, A. R., “Recent patents on photo catalysis over nano-sized titanium dioxide,” Recent Patents on Chemical Engineering, Vol. 1, 2008, pp. 209-219.

[12] Hsu, S. L., and Fang, M. C., “Method of fabricating nano-antifouling boat paint,” US 20090136441 A1, 2009.

[13] Kim, K., et.al., “Cooloids and surfaces A: Physicochemical and engineering aspects,” Vol. 311, 2007, pp. 170-171.

Statistics
Article View: 17,054