
Number of Journals | 34 |
Number of Issues | 1,306 |
Number of Articles | 9,427 |
Article View | 9,189,266 |
PDF Download | 5,621,868 |
A Study on the Physical Characteristics and Development of Plasma Reflectors | ||
رادار | ||
Article 4, Volume 9, Issue 1 - Serial Number 25, September 2021, Pages 35-44 PDF (870.57 K) | ||
Document Type: Original Article | ||
Authors | ||
Fatemeh Sadeghikia* 1; Mohammad-Reza Dorbin2; Mahmoud Talafi-Noghani1; jaber seyyedi3; Abdoreza jabbari3 | ||
1Assistant Professor, Telecommunication Research Group, Aerospace Systems Research Institute, Aerospace Research Institute, Tehran, Iran | ||
2PhD student, University of Tehran, Tehran, Iran | ||
3Researcher, Imam Hossein University, Tehran, Iran | ||
Receive Date: 04 April 2021, Revise Date: 20 July 2021, Accept Date: 14 December 2021 | ||
Abstract | ||
In this paper, the physical characteristics of a plasma reflector are investigated. It is observed that the frequency and angle of the incident electromagnetic waves and also the physical parameters of the plasma affect the characteristics of the plasma reflector. The analytical analysis show that a plasma reflector behaves like a high-pass filter whose cut-off frequency is a function of the plasma frequency and the angle of the incident electromagnetic wave. The amount of loss in this filter can be controlled by the plasma pressure and also the thickness of the reflector. It is possible to turn this filter on and off by energizing/de-energizing the plasma. In the case of the de-energized filter, the electromagnetic waves pass through it with a partial loss. In this research commercial off-the-shelf dielectric tubes which are cheap and available are used to implement the concept, and various feasible arrangements, for the implemetation of the reflectors with cylindrical dielectric tubes (equivalent to commercial plasma containers) are investigated. The simulation results show that using two tublar layers perpendicular to each other, is the most efficient structure for the plasma reflector. | ||
Keywords | ||
Plasma Reflector; Reflection Coefficient; Plasma Column; COTS Plasma Tubes | ||
References | ||
[1] M. Tohidlo, S. M. Hashemi, and F. Sadeghikia, “The Effect of AC Excitation Frequency and Waveform on U-Shaped Monopole Plasma Antenna,” Journal of Radar, vol. 7, no. 2, pp. 89-95, 2019 (in persian). [2] F. Sadeghikia, M. R. Dorbin, A. K. Horestani, M. T. Noghani, and H. Ja'afar, “Tunable inverted F antenna using plasma technologies,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 4, pp.702-706, Apr. 2019. [3] H. Ja’afar, M. T. B. Ali, A. N. B. Dagang, H. M. Zali, [4] I. Alexeff, T. Anderson, S. Parameswaran, E. P. Pradeep, [5] M. T. Jusoh, O. Lafond, F. Colombel, and M. Himdi, “Performance and radiation patterns of a reconfigurable plasma corner-reflector antenna,” IEEE Antennas and Wireless Propagation Letters, vol. 12, pp. 1137-1140, Sep. 2013. [6] X. Yuan, Z. Li, D. Rodrigo, H. Mopidevi, O. Kaynar, [7] C. Plapous, J. Cheng, E. Taillefer, A. Hirata, and T. Ohira, “Reactance domain music algorithm for electronically steerable parasitic array radiator,” IEEE Transactions on Antennas and Propagation, vol. 52, no. 12, pp. 3257-3264, Dec 2004. [8] N. Fourikis, Phased Array-Based Systems and Applications. Newyork: Wiley, 1997. [9] F. Sadeghikia, M. T. Noghani, and M. Simard, “Experimental study on the surface wave driven plasma antenna,” AEU Int. J. Electron. Commun., vol. 70, pp. 652-656, May 2016. [10] M. T. Jusoh, O. Lafond, F. Colombel, and M. Himdi, “Performance of a reconfigurable reflector antenna with scanning capability using low-cost plasma elements,” Microwave and Optical Technology Letters, vol. 55, no. 12, pp. 2869-2874, Dec. 2013. [11] O. A. Barro, O. Lafond, and H. Himdi, “Reconfigurable antennas radiations using plasma Faraday cage,” in Proc. Int. Conf. on Electromagnetics in Advanced Applications (ICEAA), Sept. 2015. [12] F. Sadeghikia, M. R. Dorbin, A. K. Horestani, M. T. Noghani, and H. Ja’afar, “Multi-beam frequency tunable antenna based on plasma-nested helix,” in Proc. 13th European conference on antennas and propagation (EuCAP), 31 March-5 Apr. 2019. [13] F. Sadeghikia, M. Valipour, M. T. Noghani, H. Ja’afar, and A.K. Horestani, “3D Beam Steering End-Fire Helical Antenna with Beamwidth Control Using Plasma Reflectors,” IEEE Transactions on Antennas and Propagation, Oct. 2020. [14] F. Sadeghikia, F. Hodjat-Kashani, J. Rashed-Mohassel, [15] F. Sadeghikia, F. Hodjat-Kashani, J. Rashed-Mohassel, and J. Ghayoomeh-Bozorgi, “Characterization of a surface wave driven plasma monopole antenna,” Journal of Electro-magnetic Waves and Applications; vol.26: no. 2, pp. 239-250,2012. [16] F. Sadeghikia, H. Mahdikia, M. R. Dorbin, M. T. N. oghani, A. K. Horestani, and H. Ja'afar, “A Study on the Effect of Gas Pressure and Excitation Frequency of a Cylindrical Plasma Antenna on its Radiation Efficiency,” 13th European Conference on Antennas and Propagation (EuCAP), Poland, March 2019. [17] M. Moisan and H. Nowakowska, “Contribution of surface-wave (SW) sustained plasma columns to the modeling of RF and microwave discharges with new insight into some of their features. A survey of other types of SW discharges,” Plasma Sources Science and Technology, vol. 27, no. 7, Jul. 2018. [18] Anderson, Theodore. Plasma antennas. Artech House, 2011. [19] D. K. Cheng, “Field and Wave Electromagnetics,” Pearson Education India, 1989. [20] N. Engheta, R. W. Ziolkowski, “Metamaterials: Physics and Engineering Explorations,” Wiley-IEEE Press, 2006. | ||
Statistics Article View: 343 PDF Download: 326 |