News

 Statistics

Number of Journals34
Number of Issues1,306
Number of Articles9,428
Article View9,191,889
PDF Download5,622,558
Peyman, S., toulabi, H. (2021). Determination of optimum lenth of blast wave trap and Analysis of steel explosion-proof door in the tunnel with a blast wave trap. Electronic and Cyber Defense, 12(3), 231-242.
Safa Peyman; hadi toulabi. "Determination of optimum lenth of blast wave trap and Analysis of steel explosion-proof door in the tunnel with a blast wave trap". Electronic and Cyber Defense, 12, 3, 2021, 231-242.
Peyman, S., toulabi, H. (2021). 'Determination of optimum lenth of blast wave trap and Analysis of steel explosion-proof door in the tunnel with a blast wave trap', Electronic and Cyber Defense, 12(3), pp. 231-242.
Peyman, S., toulabi, H. Determination of optimum lenth of blast wave trap and Analysis of steel explosion-proof door in the tunnel with a blast wave trap. Electronic and Cyber Defense, 2021; 12(3): 231-242.

Determination of optimum lenth of blast wave trap and Analysis of steel explosion-proof door in the tunnel with a blast wave trap

علوم و فناوریهای پدافند نوین
Volume 12, Issue 3 - Serial Number 45, October 2021, Pages 231-242    PDF (1.32 M)
Document Type: Original Article
Authors
Safa Peyman* ; hadi toulabi
Imam Hossein University
Receive Date: 21 November 2019,  Revise Date: 19 September 2021,  Accept Date: 04 October 2021 
Abstract
The purpose of this study is to investigate the effect of blast wave trap on reducing the detonation effect in tunnels and its effect on reducing the load on the explosion-proof door end of the tunnels and to analyze the types of doors in order to determine which type has the best performance against detonation. To this end, the propagation of the waves induced by the explosion of TNT-type beams with different weights is simulated in the tunnel span with a blast wave trap. The AUTODYN hydrocode is used for numerical simulations. The simulation and numerical modeling are compared and validated with analytical and empirical relationships of previous studies. Considering the maximum pressure applied to the tunnel intersection, the proper location of the blast wave trap, the optimal blast wave trap length and its effect on the maximum value of the tunnel end pressure are investigated. The output of the load applied to the end of the tunnel (location of the explosion-proof door) resulting from this time-dependent explosive load modeling is transferred to ABAQUS software to analyze and compare the types of explosion-proof doors. From the point of the load exerted on explosion-proof doors, hinged doors with different flat and arched geometries are analyzed using ABAQUS software and the maximum displacement and von-Mises stress of the doors are compared. The results show that the arch door performs better than the flat door.
Keywords
Explosion; Tunnel; Optimum Length of Blast Wave Trap; Analysis of the Explosion-Proof Door
References
  1. Bulson, P. S. “Explosive Loading of Engineering Structures”; E & FN SPON, 1997.##
  2. Henrych J. ”The Dynamics of Explosion and Its Use”; Elsevier, Amsterdam, 1979.##
  3. Gurke, G.; Scheklinski-Gluck, G. “An Investigation of Blast Wave Penetration into a Tunnel Entrance”; Report E7/80, Ernst-Mach-Institue der Fraunhofer-Gesellshaft, ; Freiburg, Germany,; 1980.##
  4. Binggeli, E.; Anet, B. “Experimentelle Untersuchung der Ausbreitung Iconventioneller Luftstösse in Tunnelsystemern”; 5th Int. Symp. Interaction of Conventional­ Munitions with Protective Structures, Mannheim,Germany, April 1991, p. 209.##
  5. Igara, O.; Wu, X.; Falcovitz, J.; Meguro, T.; Takayama, K.; Heilig, W. “Experimental and Theoretical Study of Shock Wave Propagation through Double-Bend Ducts”; J. Fluid Mech. 2001, 437, 255–282.##
  6. Christopherson, D. G. “Structural Defence”; UK Ministry of Home Security, Civil Defence Research Committee paper RC 450, 1946.##
  7. Peyman, S.; Tahmasebzadeh, M. “Effect of Blast Wave Trap in Tunnels with 90 Degrees Bend on Reduction of Pressure Produced by An Explosion Outside The Tunnel”; Defence Sci. & Technol. 2015, 201-210.##
  8. DOD, U.F.C. “UFC3-340-02: Structures to Resist the Effects of Accidental Explosions”; US DOD. Washington, DC, USA, 2008.##
  9. Li, Ch.; Qin, F.; Ya-Dong, Z.; Yi, Z.; Jun-Yu, F. “Numerical and Experimental Investigations on the Blast-resistant Properties of Arched RC Blast Doors”; J. Protect. Struct. 2010, 17, 425-441.##
  10. Choi, Y.; Lee, J.; Yoo, Y. H.; Yun, K. “A Study on the Behavior of Blast Proof Door under Blast Load”; J. Precision Eng. Manufacturing 2016, 17, 119-124.##
  11. Underground structural department “Design of explosion-proof doors”; Translated and Edited: Emen Gostaran Mohit Company in Persian.##
  12. Jingbo, L.; Qiushi, Y.; Jun, W. “Analysis of Blast Wave Propagation inside Tunnel”; Trans. Tianjin University, 2008, 14, 358-362.##
  13. “Design of Structures to Resist Nuclear Weapons Effects”; ASCE Manuals and Reports of Engineering Practice; no .42. ##
  14. Mojtahedpour, M. “Influence of Building Shape on Stress Distribution caused by Blast Wave”; M.Sc. Thesis, Persian Gulf University, Bushehr.##
Statistics
Article View: 320
PDF Download: 312