News

 Statistics

Number of Journals34
Number of Issues1,306
Number of Articles9,427
Article View9,189,640
PDF Download5,621,872
Ebrahimpour Kasmani, J., Samariha, A. (2023). Effects of Biopulping on Optical Properties of Chemical Mechanical Pulping Unbleached from Hornbeam Wood. Electronic and Cyber Defense, 14(53), 1-4.
Jafar Ebrahimpour Kasmani; Ahmad Samariha. "Effects of Biopulping on Optical Properties of Chemical Mechanical Pulping Unbleached from Hornbeam Wood". Electronic and Cyber Defense, 14, 53, 2023, 1-4.
Ebrahimpour Kasmani, J., Samariha, A. (2023). 'Effects of Biopulping on Optical Properties of Chemical Mechanical Pulping Unbleached from Hornbeam Wood', Electronic and Cyber Defense, 14(53), pp. 1-4.
Ebrahimpour Kasmani, J., Samariha, A. Effects of Biopulping on Optical Properties of Chemical Mechanical Pulping Unbleached from Hornbeam Wood. Electronic and Cyber Defense, 2023; 14(53): 1-4.

Effects of Biopulping on Optical Properties of Chemical Mechanical Pulping Unbleached from Hornbeam Wood

علوم و فنون بسته‌بندی
Volume 14, Issue 53, June 2023, Pages 1-4    PDF (1.08 M)
Document Type: Original Article
Authors
Jafar Ebrahimpour Kasmani* 1; Ahmad Samariha2
1Department of Wood and Paper Science & Technology, Savadkooh Branch, Islamic Azad University, Savadkooh, Iran
2Department of Wood Industry, Technical and Vocational University (TVU), Tehran, Iran
Receive Date: 26 August 2022,  Revise Date: 24 December 2022,  Accept Date: 24 January 2023 
Abstract
In this study, optical properties of paper obtained from treatments 1, 2 and 4 weeks with the fungus Phanerochaete chrysosporium BKM - 1767 was evaluated and compared with control samples. After preparing fungal specimens, hornbeam chips three levels 1, 2 and 4 weeks under laboratory conditions were treated. To Chemical Mechanical Pulping from chips treated, 165oC baking temperature, cooking time 80 and 90 minutes and the percentage of sodium sulfite chemicals: 14, 18 and 22 percent compared to the cooking liquid to chips 7 to 1 was considered. In the case of brightness, the duration of treatment is also an important factor for increasing the effect of fungal treatment. The decrease in brightness in the 4-week treatment is significant. This point indicates that in the case of hornbeem, the effect of the fungal treatment on the brightness of the paper occurs only in the 4-week treatment. More increase of yellowness in 2 and 4 week treatments shows that the effectiveness of hornbeem in relation to the yellowness factor occurs with increasing the duration of fungal treatment. The opacity of the papers obtained from the treated wood chips has almost increased, but there is no significant difference between the opacity of the papers prepared in the control treatment and the opacity of the papers prepared in the fungal treatments.
Keywords
Fungus Phanerochaete Chrysosporium BKM - 1767; Chips Hornbeam; Optical Properties
References

 Niknejad, H. Resalati, and A. Ghasemian, “Application of cellulase enzyme in waste paper recycling and its role in paper packaging products,” J. Packag. Sci. Tech., vol. 4(15) pp 4-13, 2012. (In Persian)

  • Kumar, A. Gautam, and D. Dutt, “Bio-pulping: An energy saving and environment-friendly approach,” Phy. Sci. Rev., vol 5(10) pp. 1-9, 2020.
  • Breen and F. L. Singleton, “Fungi in lignocellulose breakdown and biopulping,” Curr. Opin. Biotechnol., vol. 10(3), pp. 252-258, 1999.
  • L. Villalba, G. M. Scott, and L. R. Schroeder, “Modification of Loblolly Pine Chips with Ceriporiopsis subvermispora Part 2: Kraft Pulping of Treated Chips,” J. Wood Chem. Technol., vol. 26(4), pp. 349-362, 2006.
  • Bajpai, “Biopulping. In Biotechnology for pulp and paper processing,” Springer, Singapore, pp. 113-147, 2018.
  • Zhao, X. Li, and Y. Qu, “Application of enzymes in producing bleached pulp from wheat straw,” Bioresour. Technol., vol. 97(13), pp. 1470-1476, 2006.
  • A. Van Beek, B. Kuster, F. W. Claassen, T. Tienvieri, F. Bertaud, G. Lenon, and G. R. Sierra-Alvarez, “Fungal bio-treatment of spruce wood with Trametes versicolor for pitch control: Influence on extractive contents, pulping process parameters, paper quality and effluent toxicity,” Bioresour. Technol., vol. 98(2), pp. 302-311, 2007.
  • B. Karegoudar and M. H. Vijayakumar, “Production and Application of Laccase in Biotransformation of Lignocellulosic Material and Decolourization of Dyes,” J. Adv. Sci. Res., vol. 13(03), pp. 100-106, 2022.
  • Chauhan, S. B. Prasad, S. B. L. Meena, and P. Bhatnagar, “Exploring the Less Travelled Path of Ecofriendly Handmade Production,” In Innovations in Environmental Biotechnology Springer, Singapore. pp. 387-414, 2022.
  • J. Reppke, R. Gerstner, E. Windeisen-Holzhauser, K. Richter, and J. P. Benz, “Press water from the mechanical drying of Douglas-fir wood chips has multiple beneficial effects on lignocellulolytic fungi,” Fungal Biol. Biotechnol., vol. 9(1), pp. 1-18, 2022.
  • Wang, L. Li, H. Xu, Y. Zhang, Y. Liu, F. Zhang, and W. Wang, “Construction of a fungal consortium for effective degradation of rice straw lignin and potential application in bio-pulping,” Bioresour. Technol.,  vol. 344, pp. 126-168, 2022.
  • K. Kirk, J. W. Koning, R. Burgess, M. Akhtar, R. Blanchette, D. C. Cameron, D. Cullen, P. Kersten, E. N. Light, G. Mayers, M. B. Sykes, and M. B. Wall, “Biopulping A Glimpse of the Future?,” Madison: Wisconsin, Rep. FPl- RR- 523, 1993.
  • Potthast, T. H. Rosenau, P. Kosma, A. Saariaho, and T. Vuorinen, “On the nature of carbonyl groups in cellulosic pulps,” Cellulose, vol. 12, pp. 43–50, 2005.
  • Zaheri, G. Asadpour, H. Resalati, and K. Ohno, “Investigation of biological pre-treatment of hornbeam wood with two white rot fungi and their effects on the optical and strength properties of CMP pulp,” J. Wood Forest Sci. Technol., vol. 27(1), pp. 73-89, 2020.
  • Rasooly Garmaroody, H. Resalati, P. Fardim, S. Z. Hosseini, K. Rahnama, A. Saraeeyan, and S. A. Mirshokraee, “The effects of fungi pretreatment of poplar chips on the kraft fiber properties,” Bioresour. Technol., vol. 102, pp. 4165-4170, 2011.
  • Ebrahimpour Kasmani, “The effect of the biopulping process on the production of chemical-mechanical pulp (CMP) from hornbeam wood,” PhD Thesis, Islamic Azad University, Science and Research Branch, 2010. (In Persian)

 

Statistics
Article View: 183
PDF Download: 366