
Number of Journals | 34 |
Number of Issues | 1,306 |
Number of Articles | 9,427 |
Article View | 9,189,262 |
PDF Download | 5,621,868 |
Numerical Analysis of Loads and Stresses Exerting on a Ribbon Type Parachute | ||
علوم و فناوریهای پدافند نوین | ||
Article 6, Volume 13, Issue 4 - Serial Number 50, March 2023, Pages 271-282 PDF (1001.77 K) | ||
Document Type: Original Article | ||
Authors | ||
mohammadreza salimi* 1; amirhamzeh farajollahi2; amirhosein mohsenikafshgarkolaei3; Mohsen Ebrahimi4; mahmood ayoobi5 | ||
1Ari | ||
2,Department of Engineering, Imam Ali University, Tehran, Iran | ||
3Aerospace Department, Sharif University of Technology, Tehran, Iran | ||
4Researcher, Aerospase research institute, Twhran, Iran | ||
5Islamic Azad University Science and Research Branch | ||
Receive Date: 30 April 2022, Revise Date: 05 February 2023, Accept Date: 23 February 2023 | ||
Abstract | ||
Ribbon parachutes are used for speed reduction and stabilization of high-speed payloads and aircrafts. In the present research, a ribbon parachute is designed for air-dropped payload recovery and simulated by using multiple engineering softwares to analyze aerodynamic loads and structural stresses. The canopy is made from nylon 66; its deployed diameter is equal to 1.2 m and consists of 8 gores. The aerodynamic loads, pressure, and structural stress distributions are computed in four different free stream velocities of 40, 80, 100, and 120 (m/s). Based on these results, the most critical point on canopy structure is designated. The results show that the location where the suspension lines are attached to the fabric has the highest amount of tension and displacement due to the aerodynamic loads | ||
Keywords | ||
Ribbon Parachute; Design; Numerical Simulation; Pressure Distribution; Stress Distribution | ||
References | ||
| ||
Statistics Article View: 371 PDF Download: 285 |