Investigation of wireless power transmission compensation methods in semi-dynamic mode and selection of suitable air distance with usability in subsurface systems

[1]    X. Liu, “Dynamic response characteristics of fast charging station-evs on interaction of multiple vehicles,” IEEE Access, vol. 8, pp. 42404–42421, 2020.##[2]    G. Li, Q. Sun, L. Boukhatem, J. Wu, and J. Yang, “Intelligent vehicle-to-vehicle charging navigation for mobile electric vehicles via VANET-based communication,” IEEE Access, vol. 7, pp. 170888–170906, 2019.##[3]    Y. Zhang, S. Chen, X. Li, and Y. Tang, “Design of high-power static wireless power transfer via magnetic induction: An overview,” CPSS Transactions on Power Electronics and Applications, vol. 6, no. 4, pp. 281–297, 2021.##[4]    A. Masood, J. Hu, A. Xin, A. R. Sayed, and G. Yang, “Transactive energy for aggregated electric vehicles to reduce system peak load considering network constraints,” Ieee Access, vol. 8, pp. 31519–31529, 2020.##[5]    S. Y. Choi and C. T. Rim, “Recent progress in developments of on-line electric vehicles,” in 2015 6th International Conference on Power Electronics Systems and Applications (PESA), IEEE, 2015, pp. 1–8.##[6]    C. C. Mi, G. Buja, S. Y. Choi, and C. T. Rim, “Modern advances in wireless power transfer systems for roadway powered electric vehicles,” IEEE Transactions on Industrial Electronics, vol. 63, no. 10, pp. 6533–6545, 2016.##[7]    F. Xu, S.-C. Wong, and K. T. Chi, “Overall loss compensation and optimization control in single-stage inductive power transfer converter delivering constant power,” IEEE Trans Power Electron, vol. 37, no. 1, pp. 1146–1158, 2021.##[8]    S. A. Q. Mohammed and J.-W. Jung, “A comprehensive state-of-the-art review of wired/wireless charging technologies for battery electric vehicles: Classification/common topologies/future research issues,” IEEE Access, vol. 9, pp. 19572–19585, 2021.##[9]    G. Palani, U. Sengamalai, P. Vishnuram, and B. Nastasi, “Challenges and Barriers of Wireless Charging Technologies for Electric Vehicles,” Energies (Basel), vol. 16, no. 5, p. 2138, 2023.##[10]    J. Van Mulders et al., “Wireless power transfer: Systems, circuits, standards, and use cases,” Sensors, vol. 22, no. 15, p. 5573, 2022.##[11]    J. Shi, D. Li, and C. Yang, “Design and analysis of an underwater inductive coupling power transfer system for autonomous underwater vehicle docking applications,” Journal of Zhejiang University SCIENCE C, vol. 15, no. 1, pp. 51–62, 2014.##[12]    Z. Li, K. Dey, M. Chowdhury, and P. Bhavsar, “Connectivity supported dynamic routing of electric vehicles in an inductively coupled power transfer environment,” IET Intelligent Transport Systems, vol. 10, no. 5, pp. 370–377, 2016.##[13]    H. Wang, U. Pratik, A. Jovicic, N. Hasan, and Z. Pantic, “Dynamic wireless charging of medium power and speed electric vehicles,” IEEE Trans Veh Technol, vol. 70, no. 12, pp. 12552–12566, 2021.##[14]    S. A. Assadi, H. Matsumoto, M. Moshirvaziri, M. Nasr, M. S. Zaman, and O. Trescases, “Active saturation mitigation in high-density dual-active-bridge DC–DC converter for on-board EV charger applications,” IEEE Trans Power Electron, vol. 35, no. 4, pp. 4376–4387, 2019.##[15]    S. Niu, H. Xu, Z. Sun, Z. Y. Shao, and L. Jian, “The state-of-the-arts of wireless electric vehicle charging via magnetic resonance: principles, standards and core technologies,” Renewable and Sustainable Energy Reviews, vol. 114, p. 109302, 2019.##[16]    M. Budhia, G. A. Covic, and J. T. Boys, “Design and optimization of circular magnetic structures for lumped inductive power transfer systems,” IEEE Trans Power Electron, vol. 26, no. 11, pp. 3096–3108, 2011.##[17]    C. Cai, Y. Zhang, S. Wu, J. Liu, Z. Zhang, and L. Jiang, “A circumferential coupled dipole-coil magnetic coupler for autonomous underwater vehicles wireless charging applications,” IEEE Access, vol. 8, pp. 65432–65442, 2020.##[18]    Z. Yan, Y. Zhang, K. Zhang, B. Song, and C. Mi, “Underwater wireless power transfer system with a curly coil structure for AUVs,” IET Power Electronics, vol. 12, no. 10, pp. 2559–2565, 2019.##[19]    X. Mou, Y. Zhang, J. Jiang, and H. Sun, “Achieving low carbon emission for dynamically charging electric vehicles through renewable energy integration,” IEEE Access, vol. 7, pp. 118876–118888, 2019.##[20]    A. Zakerian, S. Vaez-Zadeh, and A. Babaki, “A dynamic WPT system with high efficiency and high power factor for electric vehicles,” IEEE Trans Power Electron, vol. 35, no. 7, pp. 6732–6740, 2019.##[21]    Y. Li et al., “Efficiency analysis and optimization control for input-parallel output-series wireless power transfer systems,” IEEE Trans Power Electron, vol. 35, no. 1, pp. 1074–1085, 2019.##[22]    J. Hou, Q. Chen, Z. Zhang, S.-C. Wong, and K. T. Chi, “Analysis of output current characteristics for higher order primary compensation in inductive power transfer systems,” IEEE Trans Power Electron, vol. 33, no. 8, pp. 6807–6821, 2017.##[23]    J. Shin et al., “Design and implementation of shaped magnetic-resonance-based wireless power transfer system for roadway-powered moving electric vehicles,” IEEE Transactions on Industrial electronics, vol. 61, no. 3, pp. 1179–1192, 2013.##[24]    A. Foote and O. C. Onar, “A review of high-power wireless power transfer,” in 2017 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2017, pp. 234–240.##[25]    F. Lu, H. Zhang, H. Hofmann, and C. C. Mi, “An inductive and capacitive combined wireless power transfer system with LC-compensated topology,” IEEE Trans Power Electron, vol. 31, no. 12, pp. 8471–8482, 2016.##[26]    W. Li, W. Mei, Q. Yuan, Y. Song, Z. Dongye, and L. Diao, “Detuned Resonant Capacitors Selection for Improved Misalignment Tolerance of LCC-S Compensated Wireless Power Transfer System,” IEEE Access, vol. 10, pp. 49474–49484, 2022.##[27]    Z. U. Zahid et al., “Design and control of a single-stage large air-gapped transformer isolated battery charger for wide-range output voltage for EV applications,” in 2013 IEEE Energy Conversion Congress and Exposition, IEEE, 2013, pp. 5481–5487.