بررسی تاثیر استایرن بوتادین رابر، اتیلن وینیل استات و اکریلیک لاتکس بر خواص مکانیکی بتن سبک

[1] T.M Pham,., M. Elchalakani, H. Hao, J. Lai, S. Ameduri, and T.M. Tran, "Durability characteristics of lightweight rubberized concrete." Construction and Building Materials. 224: p. 584-599, 2019.

[2] , F.K Alqahtani., G. Ghataora, M.I. Khan, and S. Dirar, "Novel lightweight concrete containing manufactured plastic aggregate." Construction and Building Materials. 148: p. 386-397, 2017.

[3] R Madandoust,., M. Kazemi, P.K. Talebi, and J. de Brito, "Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres." Construction and Building Materials. 223: p. 1038-1052, 2019.

[4] N, Atmaca,., M.L. Abbas, and A. Atmaca, "Effects of nanosilica on the gas permeability, durability and mechanical properties of high-strength lightweight concrete." Construction and Building Materials. 147: p. 17-26, 2017.

[5] S, Patel,., R. Majhi, H. Satpathy, and A. Nayak, "Durability and mic rostructural properties of lightweight concrete manufactured with fly ash cenosphere and sintered fly ash aggregate." Construction and Building Materials. 226: p. 579-590, 2019.

[6] P, Lau,., D. Teo, and M. Mannan, "Mechanical, durability and microstructure properties of lightweight concrete using aggregate made from lime-treated sewage sludge and palm oil fuel ash." Construction and Building Materials. 176: p. 24-34, 2018.

[7] M, Kadela,., A. Kukiełka, and M. Małek, "Characteristics of lightweight concrete based on a synthetic polymer foaming agent." Materials. 13(21): p. 4979, 2020.

[8] F, Heidarnezhad,., K. Jafari, and T. Ozbakkaloglu, "Effect of polymer content and temperature on mechanical properties of lightweight polymer concrete." Construction and Building Materials. 260: p. 119853, 2020.

[9] J.P, Gorninski,., D.C. Dal Molin, and C.S. Kazmierczak, "Study of the modulus of elasticity of polymer concrete compounds and comparative assessment of polymer concrete and portland cement concrete." Cement and concrete research. 34(11): p. 2091-2095, 2004.

[10] M,.Ribeiro, , C. Tavares, and A. Ferreira, "Chemical resista nce of epoxy and polyester polymer concrete to acids and salts." Journal of polymer engineering. 22(1): p. 27-44, 2002.

[11] A.C, Bhogayata,. and N.K. Arora, "Workability, strength, and durability of concrete containing recycled plastic fibers and styrene-butadiene rubber latex." Construction and Building Materials. 180: p. 382-395, 2018.

[12] V.Gregorova, , M. Ledererova, and Z. Stefunkova, "Investigation of influence of recycled plastics from cable, ethylene vinyl acetate and polystyrene waste on lightweight concrete properties." Procedia engineering. 195: p. 127-133, 2017.

[13] B.Liu, , J. Shi, M. Sun, Z. He, H. Xu, and J. Tan, "Mechanical and permeability properties of polymer-modified concrete using hydrophobic agent." Journal of Building Engineering. 31: p. 101337, 2020.

[14] Y.Ohama, , Handbook of polymer-modified concrete and mortars: properties and process technology. Series "Handbook of polymer-modified concrete and mortars: properties and process technology": William Andrew. 1995.

[15] B Z.ahranifard, , F.F. Tabrizi, and A.R. Vosoughi, "An investigation on the effect of styrene-butyl acrylate copolymer latex to improve the properties of polymer modified concrete." Construction and Building Materials. 205: p. 175-185, 2019.

[16] P.Chindasiriphan, , H. Yokota, and P. Pimpakan, "Effect of fly ash and superabsorbent polymer on concrete self-healing ability." Construction and Building Materials. 233: p. 116975, 2020.

[17] L.Sui, , M. Luo, K. Yu, F. Xing, P. Li, Y. Zhou, and C. Chen, "Effect of engineered cementitious composite on the bond behavior between fiber-reinforced polymer and concrete." Composite Structures. 184: p. 775-788, 2018.

[18] F.Moodi, , A. Kashi, A.A. Ramezanianpour, and M. Pourebrahimi, "Investigation on mechanical and durability properties of polymer and latex-modified concretes." Construction and Building Materials. 191: p. 145-154, 2018.

[19] H.Tanyildizi, , "Long-term microstructure and mechanical properties of polymer-phosphazene concrete exposed to freezethaw." Construction and Building Materials. 187: p. 1121-1129, 2018.

[20] , J.A Rossignolo. and M.V. Agnesini, "Durability of polymermodified lightweight aggregate concrete." Cement and Concrete Composites. 26(4): p. 375-380, 2004.

[21] Y.Ohama, , "Principle of latex modification and some typical properties of latex-modified mortars and concretes adhesion; binders (materials); bond (paste to aggregate); carbonation; chlorides; curing; diffusion." Materials Journal. 84(6): p. 511-518, 1987.

[22] J.Alduaij, , K. Alshaleh, M.N. Haque, and K. Ellaithy, "Lightweight concrete in hot coastal areas." Cement and Concrete Composites. 21(5-6): p. 453-458, 1999.

[23] N, Haque,. and H. Al-Khaiat, "Strength and durability of lightweight concrete in hot marine exposure conditions." Materials and Structures. 32(7): p. 533-538, 1999.

[24] M.H. Zhang, and O.E. Gjvorv, "Mechanical properties of high-strength lightweight concrete." Materials Journal. 88(3): p. 240-247, 1991.

[25] S.Ahn, , S. Kwon, Y.-T. Hwang, H.-I. Koh, H.-S. Kim, and J. Park, "Complex structured polymer concrete sleeper for rolling noise reduction of high-speed train system." Composite Structures. 223: p. 110944, 2019.

[26] M.Bignozzi, , A. Saccani, and F. Sandrolini, "New polymer mortars containing polymeric wastes. Part 2. Dynamic mechanical and dielectric behaviour." Composites Part A: applied science and manufacturing. 33(2): p. 205-211, 2002.

[27] J, Assaad,. and Y. Daou, "Behavior of structural polymermodified concrete containing recycled aggregates." Journal of adhesion science and Technology. 31(8): p. 874-896, 2017.

[28] Y. Tian, , X. Yan, T. Yang, J. Zhang, and Z. Wang, "Effect of the characteristics of lightweight aggregates presaturated polymer emulsion on the mechanical and damping properties of concrete." Construction and Building Materials. 253: p. 119154, 2020.

[29] H.M, Thiyab,., "Mechanical Properties of Light Weight Polymer Modified Concrete Made with Chopped Rubber Tires." Journal of University of Babylon. 25(4), 2017.

[30] C, Shi,., X. Zou, L. Yang, P. Wang, and M. Niu, "Influence of humidity on the mechanical properties of polymer-modified cement-based repair materials." Construction and Building Materials. 261: p. 119928, 2020

[31] S.Hong, , "Influence of curing conditions on the strength properties of polysulfide polymer concrete." Applied Sciences. 7(8): p. 833, 2017.

[32] S.-H, Hyun,. and J.H. Yeon, "Strength development characteristics of UP-MMA based polymer concrete with different curing temperature." Construction and Building Materials. 37: p. 387-397, 2012.

[33] V. Rybalko, , A. Nikityuk, E. Pisarenko, P. D’yachenko, A. Korchmarek, and V. Kireev, "High-strength fast-curing polymeric composite material." Russian Journal of Applied Chemistry. 87(9): p. 1350-1354, 2014.

[34] ASTM, ASTM C150–07: Standard Specification for Portland Cement, ASTM International West Conshohocken, PA, USA. 2007.

[35] L.Zapata, , G. Portela, O. Suárez, and O. Carrasquillo, "Rheological performance and compressive strength of superplasticized cementitious mixtures with micro/nano-SiO 2 additions." Construction and Building Materials. 41: p. 708-716, 2013.

[36] T.Matusinović, , J. Šipušić, and N. Vrbos, "Porosity–strength relation in calcium aluminate cement pastes." Cement and concrete research. 33(11): p. 1801-1806, 200