| تعداد نشریات | 38 |
| تعداد شمارهها | 1,408 |
| تعداد مقالات | 10,088 |
| تعداد مشاهده مقاله | 11,909,121 |
| تعداد دریافت فایل اصل مقاله | 6,961,242 |
بررسی شرایط بهینه فلوتاسیون مس در معدن بایچه باغ (مطالعه موردی: رگه خشنودی) | ||
| علوم و فنون سازندگی | ||
| دوره 6، شماره 2 - شماره پیاپی 19، آبان 1404، صفحه 65-76 اصل مقاله (1.15 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| نویسندگان | ||
| آرش ثبوتی* 1؛ امیر زینالی2 | ||
| 1دانشجوی دکتری، دانشکده مهندسی معدن، دانشگاه صنعتی امیرکبیر، تهران، ایران | ||
| 2کارشناسی ارشد فرآوری مواد معدنی، دانشگاه تربیت مدرس، تهران، ایران | ||
| تاریخ دریافت: 24 مهر 1403، تاریخ بازنگری: 14 اسفند 1403، تاریخ پذیرش: 12 آبان 1404 | ||
| چکیده | ||
| در این پژوهش، بعد از تهیه نمونه معرف از رگه خشنودی معدن، مطالعات شناسایی و خواص سنجی صورت گرفت. بر اساس مطالعات پتروگرافی و میکروسکوپی؛ کانیهای اصلی نمونه شامل کالکوپیریت، پیریت، کانیهای اکسید آهن مانند هماتیت، گوتیت و لیمونیت و کانیهای کربناته مس مانند مالاکیت و آزوریت میباشد. بر اساس آنالیز پراش پرتو ایکس (XRD)، نمونه عمدتا از کانیهای کوارتز، آلبیت، موسکویت-ایلیت، دولومیت، پتاسیم فلدسپات، کائولینیت، کانی های رسی گروه اسمکتیت و کلسیت تشکیل شده است. نتایج آنالیز AAS نشان داد که عیار مس و طلا در نمونه به ترتیب 5/0 درصد و ppb 186 است. بر اساس مطالعات میکروسکوپ الکترونی روبشی، هیچگونه طلای آزاد مشاهده نشد و طلا عمدتا به صورت جایگزینی در شبکه کانی کالکوپیریت و به مقدار کم در اکسیدهای آهن حضور دارد. پارامترهای موثر مانند pH، غلظت و نوع کلکتور و غلظت سولفیداسیون در پرعیارسازی به روش فلوتاسیون بررسی شد. بهینه سازی پارامترها میتواند تأثیرات مختلفی بر عملیات معدن مانند کاهش هزینهها و همچنین کاهش میزان آلودگی یا استفاده بهتر از منابع همراه باشد. نتایج نشان داد که در شرایط بهینه، در 10=pH، غلظت 150 گرم بر تن از کلکتور پتاسیم آمیل گزنتات و غلظت 200 گرم بر تن سولفید سدیم، بازیابی مس اکسیدی و سولفیدی به ترتیب 6/66 و 3/75 درصد بدست آمد که با دو مرحله کلینر بر روی کنسانتره بدست آمده، کنسانترهای با عیار مس 09/24 درصد حاصل شد. | ||
| کلیدواژهها | ||
| پرعیارسازی؛ فلوتاسیون؛ مس؛ معدن بایچه باغ | ||
| عنوان مقاله [English] | ||
| Investigating the optimal conditions of copper flotation in Bayche Bagh mine (Case study: Khoshnodi vein) | ||
| نویسندگان [English] | ||
| Arash Sobuti1؛ Amir Zeynali2 | ||
| 1Ph.D Student, Department of Mining Engineering, Amirkabir University of Technology, Tehran, Iran | ||
| 2Master of Science in Mineral Processing, Tarbiat Modares University, Tehran, Iran | ||
| چکیده [English] | ||
| In this research, after preparing a representative sample from the Khoshnodi vein's. Identification and property evaluation studies were conducted. Based on petrographic and microscopic studies, the main minerals in the sample include chalcopyrite, pyrite, iron oxide minerals such as hematite, goethite, and limonite, and copper carbonate minerals such as malachite and azurite. The XRD analysis reveals that the sample primarily consists of quartz, albite, muscovite-illite, dolomite, potassium feldspar, kaolinite, smectite group clay minerals, and calcite. AAS analysis results showed that the copper and gold grades in the sample were 0.5% and 186 ppb, respectively. Based on scanning electron microscopy studies, no free gold was observed, and gold was mainly present as a substitute in the chalcopyrite mineral lattice and in small amounts in iron oxides. Effective parameters such as pH, collector concentration and type, and sulfidation concentration in flotation enrichment were investigated. Optimization of parameters can have various impacts on mining operations, such as reducing costs as well as decreasing pollution levels or improving the utilization of resources. The results showed that under optimal conditions, at pH = 10, a concentration of 150 g/ton of potassium amyl xanthate (PAX) collector and a concentration of 200 g/ton of sodium sulfide, the recovery of oxidized and sulfide copper was 66.6% and 75.3%, respectively, and with two stages of cleaning on the obtained concentrate, a concentrate with a copper grade of 24.09% was obtained. | ||
| کلیدواژهها [English] | ||
| Concentration, Flotation, Copper, Bayche Bagh mine | ||
| مراجع | ||
|
[1] Lotfi and M. Karimi, "Mineralogy and ore genesis of Bayche Bagh five elements (Ag-Ni-Co-As-Bi) vein deposit (NW Zanjan, Iran)," Scientific Quarterly Journal, Geosciences, vol. 12, no. 53, pp. 40-55, 2004. [2] Feng, W. Yang, S. Wen, H. Wang, W. Zhao, and G. Han, "Flotation of copper oxide minerals: A review," International Journal of Mining Science and Technology, vol. 32, no. 6, pp. 1351-1364, 2022. [3] -F. Cao, H. Zhong, G.-Y. Liu, and S.-J. Zhao, "Techniques of copper recovery from Mexican copper oxide ore," Mining Science and Technology (China), vol. 19, no. 1, pp. 45-48, 2009. [4] Zhang, L. Huang, X. Sun, B. Hu, Y. Li, and Z. Lan, "A new perspective on copper oxide flotation: Synthesis and mechanism study of a surfactant for sulfide-free flotation," Inorganic Chemistry Communications, vol. 155, p. 110990, 2023. [5] Cai et al., "Role of ammonium sulfate in sulfurization flotation of azurite: Inhibiting the formation of copper sulfide colloid and its mechanism," International Journal of Mining Science and Technology, vol. 32, no. 3, pp. 575-584, 2022. [6] Lee, D. Archibald, J. McLean, and M. Reuter, "Flotation of mixed copper oxide and sulphide minerals with xanthate and hydroxamate collectors," Minerals engineering, vol. 22, no. 4, pp. 395-401, 2009. [7] L. Ge, Y. X. Fu, and Q. Li, "A Copper Oxide Ore Treatment by Flotation," Advanced Materials Research, vol. 813, pp. 230-233, 2013. [8] Asadi, F. Soltani, M. R. T. Mohammadi, D. A. Khodadadi, and M. Abdollahy, "A successful operational initiative in copper oxide flotation: Sequential sulphidisation-flotation technique," Physicochemical Problems of Mineral Processing, vol. 55, 2019. [9] Zhu, G. Gu, Z. Chen, Y. Wang, and S. Song, "A new collector for effectively increasing recovery in copper oxide ore-staged flotation," Minerals, vol. 9, no. 10, p. 595, 2019. [10] Koleini, F. Soltani, and M. Abdollahy, "Optimization of the reagent types and dosage in selective flotation of Cu-Zn Taknar mine by using D-Optimal method of statistical experiments design," Journal of Mining Engineering, vol. 8, no. 19, pp. 1-11, 2013. [11] T. Kundu, S. Senapati, S. K. Das, S. I. Angadi, and S. S. Rath, "A comprehensive review on the recovery of copper values from copper slag," Powder Technology, vol. 426, p. 118693, 2023. | ||
|
آمار تعداد مشاهده مقاله: 145 تعداد دریافت فایل اصل مقاله: 83 |
||