Frequency Analysis of Pulsed Inductor with Ferrite Core for LPS

[1]       G. Johnson, R. Shalaev, R. Hartnett, P. Swaszek, M. Narins “Can Loran meet GPS backup## requirements?”, IEEE Aerospace and Electronic Systems Magazine,Vol. 20, No. 2, pp. 3-12, February 2005.##

[2]      C. L, Sherman, B. B. Peterson, C. O. Lee Boyce Jr, Per K. “Loran coverage availability simulation tool” In Proceedings of the Royal Institute of Navigation NAV08/ International Loran Association 37th Annual Meeting, London, UK, October 2008.##

[3]      L. Wang, W. Ou-Yang , “The Research of Timing Application and Synchronization Technology of Chinese Loran-C System”, The 2nd IEEE International Conference on Industrial and Information Systems, 2010.##

[4]      PATENT NO. : 7,064,705 B2 ,APPLICATION NO. : 10/877000, DATED : June 20, 2006.##

[5]      M. Bartoli, M. K. Kazimierczuk, and A. Reatti,  "Predicting the high-frequency ferrite-core inductor performance",  Elect. Manufacturing Coil Winding Conf.,  pp.409 -413 1994.##

[6]      M. Bartoli, M. K. Kazimierczuk, and A. Reatti,  "Modeling iron-powder inductors at high frequency",  29th IEEE Industry Application. Soc. Annu. Meeting Tech. Conf,  pp.1225 -1232 1994.##

[7]      Jafari, Mohammad, Zahra Malekjamshidi, Gang Lei, Tianshi Wang, Glenn Platt, and Jianguo Zhu. "Design and Implementation of an Amorphous High-Frequency Transformer Coupling Multiple Converters in a Smart Microgrid." IEEE Transactions on Industrial Electronics,vol  64, no. 2,pp. 1028-1037,2017.##

[8]      J. K. Watson,  Applications of Magnetism,  1980, Wiley.##

[9]      H. Saotome and Y. Sakaki, "Iron loss analysis of Mn-Zn Ferrite cores",  IEEE Trans. Magnetics,  vol. 33,  pp.728 -734 ,1997.##

[10]      M. Honda,  The Impedance Measurement Handbook,Hewlett Packard Co,  1994.##

[11]      Kowal, Damian, Peter Sergeant, Luc Dupré, and Lode Vandenbossche. "Comparison of iron loss models for electrical machines with different frequency domain and time domain methods for excess loss prediction." IEEE Trans. Magnet, vol 51, no. 1, pp.1-10,2015.##

[12]      Zhao, Jianhui, Pengfei Yue, Leonid Grekhov, and Xiuzhen Ma. "Hold current effects on the power losses of high-speed solenoid valve for common-rail injector." Applied Thermal Engineering vol 128 , 1579-1587,2018.##

[13]      Deng, Zhiyang, Yihua Kang, Jikai Zhang, and Kai Song. "Multi-source effect in magnetizing-based eddy current testing sensor for surface crack in ferromagnetic materials." Sensors and Actuators A: Physical vol 271 ,pp. 24-36,2018.##

[14]      C. Marxgut, J. Muhlethaler, F. Krismer, and J. W. Kolar, “Multi objective optimization of ultra flat magnetic components with pcb-integrated core,” IEEE Transactions on Power Electronics, vol. 28, no. 7, pp. 3591–3602, 2013.##

[15]      P. J. Dowell,  "Effects of eddy currents in transformer windings",  Proc. Inst. Elect. Eng.,  vol. 113,  pp.1387 -1394 1966.##

[16]      M. R. Alizadeh Pahlevan, “A New Approach for Designing Current Compression Generators with the Aim of Energy Efficiency Improvement and the Quality of LORAN Signal in Local Positioning System,”  Journal of Applied Electromagnetics,  vol. 3,  no. 3, pp. 1 -10, 2015 (In Persian).##

[17]      Ioniţă, Valentin, Lucian Petrescu, Emil Cazacu, Eros-Alexandru Pătroi, and Eugen Manta. "Improved prediction of hysteresis losses in electrical machine cores." In Modern Power Systems (MPS), 2017 International Conference on, pp. 1-4. IEEE, 2017.##

[18]      M. Kiani, U. Jow and M. Ghovanloo  "Design and optimization of a 3-coil inductive link for efficient wireless power transmission",  IEEE Trans. Biomed. Circuits Syst.,  vol. 5,  no. 6,  pp.579 -591 2011.##

[19]      G. N. Watson, "A Treatise on the Theory of Bessel Functions",Cambridge Univ. Press,  1966.##