تحلیل چرخ‌دنده مغناطیسی هم محور با ساختار قطب منتجه بر مبنای مدار معادل مغناطیسی

[1]     S. Niu, N. Chen, S. L. Ho, and W. N. Fu, “Design Optimization of Magnetic Gears Using Mesh Adjustable Finite-Element Algorithm for Improved Torque,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 4156-4159, 2012.##

[2]     K. Atallah, S. D. Calverley, and D. Howe, “High-performance magnetic gears,” Journal of Magnetism and Magnetic Materials, vol. 272-276, no. Supplement, pp. E1727-E1729, 2004/05/01/ 2004.##

[3]     X. L. Xiaoxu Zhang, Chao Wang, and Zhe Chen, “Analysis and Design Optimization of a Coaxial Surface-Mounted Permanent-Magnet Magnetic Gear,” Energies, vol. 7, no. 12, pp. 8535-8553, 2014.##

[4]     Y. F. Xin Yin, Xiaoyan Huang, “Analytical Modeling of a Novel Vernier Pseudo-Direct-Drive Permanent-Magnet Machine,” IEEE Transactions on Magnetics vol. 53, no. 6, 2017.##

[5]     P. M. Tlali, R. J. Wang, and S. Gerber, “Magnetic gear technologies: A review,” in 2014 International Conference on Electrical Machines (ICEM), pp. 544-550, 2014.##

[6]     Y. D. Yao, D. R. Huang, C. M. Lee, S. J. Wang, D. Y. Chiang, and T. F. Ying, “Magnetic coupling studies between radial magnetic gears,” IEEE Transactions on Magnetics, vol. 33, no. 5, pp. 4236-4238, 1997.##

[7]     Y. D. Yao, D. R. Huang, C. C. Hsieh, D. Y. Chiang, and S. J. Wang, “Simulation study of the magnetic coupling between radial magnetic gears,” IEEE Transactions on Magnetics, vol. 33, no. 2, pp. 2203-2206, 1997.##

[8]     S. Kikuchi and K. Tsurumoto, “Design and characteristics of a new magnetic worm gear using permanent magnet,” IEEE Transactions on Magnetics, vol. 29, no. 6, pp. 2923-2925, 1993.##

[9]     S. Kikuchi and K. Tsurumoto, “Trial construction of a new magnetic skew gear using permanent magnet,” IEEE Transactions on Magnetics, vol. 30, no. 6, pp. 4767-4769, 1994.##

[10]   J. Rens and K. Atallah, “A Novel Magnetic Harmonic Gear,” Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International, pp. 3-8, 2007.##

[11]   K. Davey, L. McDonald, and T. Hutson, “Axial Flux Cycloidal Magnetic Gears,” IEEE Transactions on Magnetics, vol. 50, no. 4, 2014.##

[12]   Y. Chen and F. Weinong, “A novel hybrid-flux magnetic gear and its performance analysis using the 3-D finite element method,” Energies, vol. 8, no. 5, pp. 3313-3327, 2015.##

[13]   M. Chen, K.-t. Chau, C. H. T. Lee, and C. Liu, “Design and Analysis of a New Axial-Field Magnetic Variable Gear Using Pole-Changing Permanent Magnets,” Progress In Electromagnetics Research, vol. 153, no. October, pp. 23-32, 2015.##

[14]   K. Atallah and D. Howe, “A novel high-performance magnetic gear,” IEEE Transactions on Magnetics, vol. 37, no. 4, pp. 2844-2846, 2001.##

[15]   L. Jian and K. T. Chau, “A Coaxial Magnetic Gear With Halbach Permanent-Magnet Arrays,” IEEE Transactions on Energy Conversion, vol. 25, no. 2, pp. 319-328, 2010.##

[16]   L. Jian, K. T. Chau, Y. Gong, J. Z. Jiang, C. Yu, and W. Li, “Comparison of Coaxial Magnetic Gears With Different Topologies,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4526-4529, 2009.##

[17]   J. X. Shen, H. Y. Li, H. Hao, M. J. Jin, and Y. C. Wang, “Topologies and performance study of a variety of coaxial magnetic gears,” IET Electric Power Applications, vol. 11, no. 7, pp. 1160-1168, 2017.##

[18]   H. M. Shin and J. H. Chang, “Analytical Magnetic Field Calculation of Coaxial Magnetic Gear With Flux Concentrating Rotor,” IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, 2016.##

[19]   T. Lubin, S. Mezani, and A. Rezzoug, “Analytical Computation of the Magnetic Field Distribution in a Magnetic Gear,” IEEE Transactions on Magnetics, vol. 46, no. 7, pp. 2611-2621, 2010.##

[20]   Y.-J. Ge, C.-Y. Nie, and Q. Xin, “A three dimensional analytical calculation of the air-gap magnetic field and torque of coaxial magnetic gears,” Progress In Electromagnetics Research, vol. 131, pp. 391-407, 2012.##

[21]   B. Dianati, H. Heydari, and S. A. Afsari, “Analytical computation of air-gap magnetic field in a viable superconductive magnetic gear,” IEEE Transactions on Applied Superconductivity, vol. 26, no. 6, pp. 1-12, 2016.##

[22]   C.-T. Liu, K.-Y. Hung, and C.-C. Hwang, “Developments of an Efficient Analytical Scheme for Optimal Composition Designs of Tubular Linear Magnetic-Geared Machines,” IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, 2016.##

[23]   M. Desvaux, B. Traullé, R. L. G. Latimier, S. Sire, B. Multon, and H. B. Ahmed, “Computation Time Analysis of the Magnetic Gear Analytical Model,” IEEE Transactions on Magnetics, vol. 53, no. 5, pp. 1-9, 2017.##

[24]   A. Rahideh, A. A. Vahaj, M. Mardaneh, and T. Lubin, “Two-dimensional analytical investigation of the parameters and the effects of magnetisation patterns on the performance of coaxial magnetic gears,” IET Electrical Systems in Transportation, vol. 7, no. 3, pp. 230-245, 2017.##

[25]   A. S. Abdel-Khalik, A. S. Elshebeny, and S. Ahmed, “Design and evaluation of a magnetic planetary gearbox for compact harsh environments,” SPEEDAM 2010 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion, pp. 1178-1182, 2010.##

[26]   H. N. Niguchi and K. Howe, “Transmission Torque Analysis of a Novel Magnetic Planetary Gear Employing 3-D FEm,” IEEE Transactions on Magnetics, vol. 48, no. 2, pp. 1043-1046, 2012.##

[27]   S. Peng, W. N. Fu, and S. L. Ho, “A Novel Triple-Permanent-Magnet-Excited Hybrid-Flux Magnetic Gear and Its Design Method Using 3-D Finite Element Method,” IEEE Transactions on Magnetics, vol. 50, no. 11, pp. 3313-3327, 2014.##

[28]   K. Nakamura, M. Fukuoka, and O. Ichinokura, “Performance improvement of magnetic gear and efficiency comparison with conventional mechanical gear,” Journal of Applied Physics, vol. 115, no. 17, pp. 50-53, 2014.##

[29]   N. Niguchi, K. Hirata, M. Muramatsu, and Y. Hayakawa, “Eddy current analysis of magnetic gear employing 3-D FEM,” Electromagnetic Field Computation (CEFC), 2010 14th Biennial IEEE Conference on, vol. 540, no. 2009, p. 1, 2010.##

[30]   M. Fukuoka, K. Nakamura, and O. Ichinokura, “Dynamic Analysis of Planetary-Type Magnetic Gear Based on Reluctance Network Analysis,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 2414-2417, 2011.##

[31]   M. Fukuoka, K. Nakamura, and O. Ichinokura, “RNA-Based Optimum Design method for SPM type Magnetic Gears,” Journal of the Magnetics Society of Japan, vol. 37, no. 3-2, pp. 264-267, 2013.##

[32]   Y.-C. Wu and B.-S. Jian, “Magnetic field analysis of a coaxial magnetic gear mechanism by two-dimensional equivalent magnetic circuit network method and finite-element method,” Applied Mathematical Modelling, vol. 39, no. 19, pp. 5746-5758, 2015.##

[33]   M. Johnson, M. C. Gardner, and H. A. Toliyat, “A Parameterized Linear Magnetic Equivalent Circuit for Analysis and Design of Radial Flux Magnetic Gears—Part I: Implementation,” IEEE Transactions on Energy Conversion, 2017.##

[34]   F. Abolqasemi-Kharanaq, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Magnetic Equivalent Circuit Model for Wound Rotor Resolver Without Rotary Transformer’s Core,” J. IEEE Sensors Journal, vol. 18, no. 21, pp. 8693-8700, 2018.##

[35]   J. Bao, B. Gysen, and E. Lomonova, “Hybrid analytical modeling of saturated linear and rotary electrical machines: Integration of Fourier modeling and magnetic equivalent circuits,” J. IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1-5, 2018.##

[36]   P. Naderi and A. Shiri, “Modeling of ladder-secondary-linear induction machine using magnetic equivalent circuit,” J IEEE Transactions on Vehicular Technology, vol. 67, no. 12, pp. 11411-11419, 2018.##

[37]   P. Ojaghlu, A. Vahedi, and F. Totoonchian, “Magnetic equivalent circuit modelling of ring winding axial flux machine,” J. IET Electric Power Applications, vol. 12, no. 3, pp. 293-300, 2017.##

[38]   J.-H. Sim, D.-G. Ahn, D.-Y. Kim, and J.-P. Hong, “Three-dimensional equivalent magnetic circuit network method for precise and fast analysis of PM-assisted claw-pole synchronous motor,” J. IEEE Transactions on Industry Applications, vol. 54, no. 1, pp. 160-171, 2017.##

[39]   H. F. Farahani, “Magnetic equivalent circuit modelling of coaxial magnetic gears considering non-linear magnetising curve,” J. IET Science, Measurement Technology, vol. 14, no. 4, pp. 454-461, 2020.##

[40]   K. Nakamura and O. Ichinokura, “Dynamic simulation of PM motor drive system based on reluctance network analysis,” in 2008 13th International Power Electronics and Motion Control Conference, IEEE, pp. 758-762, 2008.##

[41]   M. Cheng, K. Chau, C. Chan, E. Zhou, and X. J. I. T. o. M. Huang, “Nonlinear varying-network magnetic circuit analysis for doubly salient permanent-magnet motors,” vol. 36, no. 1, pp. 339-348, 2000.##

[42]   S. Mallampalli and V. Rallabandi, “Parametric study of magnetic gear for maximum torque transmission,” in 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), pp. 1-5, 2014.##