بررسی عددی خصوصیات جریان و انتقال حرارت روی یک صفحه مسطح تحت تاثیر یک جت برخوردی خود محرک

[1]         H. M. Maghrabie, “Heat transfer intensification of jet impingement using exciting jets - A comprehensive review,” Renew. Sustain. Energy Rev., vol. 139, no. September 2020, p. 110684, 2021, doi: 10.1016/j.rser.2020.110684.

[2]         M. A. Hossain, “Sweeping Jet Film Cooling,” 2020.

[3]         M. A. Hossain, R. Prenter, R. K. Lundgreen, A. Ameri, J. W. Gregory, and J. P. Bons, “Experimental & numerical investigation of sweeping jet film cooling,” Proc. ASME Turbo Expo, vol. 5C-2017, no. June, 2017, doi: 10.1115/GT2017-64479.

[4]         W. Zhou, L. Yuan, Y. Liu, D. Peng, and X. Wen, “Heat transfer of a sweeping jet impinging at narrow spacings,” Exp. Therm. Fluid Sci., vol. 103, no. November 2018, pp. 89–98, 2019, doi: 10.1016/j.expthermflusci.2019.01.007.

[5]         M. Koklu, “Effect of a coanda extension on the performance of a sweeping-jet actuator,” AIAA J., vol. 54, no. 3, pp. 1125–1128, 2016, doi: 10.2514/1.J054448.

[6]         S. Ghanami and M. Farhadi, “Fluidic Oscillators’ Applications, Structures and Mechanisms– A review,” vol. 7, no. 1, pp. 9–27, 2019, doi: 10.22111/tpnms.2018.25051.1153.

[7]         R. Abdelmaksoud and T. Wang, “A Review on Thermal-Fluid Behavior in Sweeping Jet Fluidic Oscillators,” pp. 979–1003, 2021, doi: 10.1615/tfec2021.hte.036836.

[8]         A. Spens and J. P. Bons, “Experimental investigation of synchronized sweeping jets for film cooling applications,” AIAA Scitech 2021 Forum, no. January, pp. 1–15, 2021, doi: 10.2514/6.2021-2003.

[9]         L. Agricola et al., “Impinging sweeping jet heat transfer,” 53rd AIAA/SAE/ASEE Jt. Propuls. Conf. 2017, no. July, pp. 1–18, 2017, doi: 10.2514/6.2017-4974.

[10]      M. A. Hossain, L. M. Agricola, A. Ameri, J. W. Gregory, and J. P. Bons, “Effects of curvature on the performance of sweeping jet impingement heat transfer,” in AIAA Aerospace Sciences Meeting, 2018, 2018, no. 210059. doi: 10.2514/6.2018-0243.

[11]      T. Park, K. Kara, and D. Kim, “Flow structure and heat transfer of a sweeping jet impinging on a flat wall,” Int. J. Heat Mass Transf., vol. 124, pp. 920–928, 2018, doi: 10.1016/j.ijheatmasstransfer.2018.04.016.

[12]      M. A. Hossain, L. M. Agricola, A. Ameri, J. W. Gregory, and J. P. Bons, “Effects of exit fan angle on the heat transfer performance of sweeping jet impingement,” 2018 Int. Energy Convers. Eng. Conf., no. May 2019, 2018, doi: 10.2514/6.2018-4886.

[13]      Y. Wu, S. Yu, and L. Zuo, “Large eddy simulation analysis of the heat transfer enhancement using self-oscillating fluidic oscillators,” Int. J. Heat Mass Transf., vol. 131, pp. 463–471, 2018, doi: 10.1016/j.ijheatmasstransfer.2018.11.070.

[14]      L. Agricola, M. A. Hossain, A. Ameri, J. W. Gregory, and J. P. Bons, “Sweeping jet impingement heat transfer on a simulated turbine vane leading edge,” Proc. ASME Turbo Expo, vol. 5A-2018, no. May, 2018, doi: 10.1115/GT2018-77073.

[15]      S. H. Kim, H. D. Kim, and K. C. Kim, “Measurement of two-dimensional heat transfer and flow characteristics of an impinging sweeping jet,” Int. J. Heat Mass Transf., vol. 136, pp. 415–426, 2019, doi: 10.1016/j.ijheatmasstransfer.2019.03.021.

[16]      D. J. Kim, S. Jeong, T. Park, and D. Kim, “Impinging sweeping jet and convective heat transfer on curved surfaces,” Int. J. Heat Fluid Flow, vol. 79, no. May, p. 108458, 2019, doi: 10.1016/j.ijheatfluidflow.2019.108458.

[17]      M. A. Hossain, A. Ameri, J. W. Gregory, and J. Bons, “Effects of Fluidic Oscillator Nozzle Angle on the Flowfield and Impingement Heat Transfer,” no. April, 2021, doi: 10.2514/1.J059931.

[18]      A. Joulaei, M. Nili-Ahmadabadi, and K. Chun Kim, “Parametric study of a fluidic oscillator for heat transfer enhancement of a hot plate impinged by a sweeping jet,” Appl. Therm. Eng., vol. 205, no. December 2021, p. 118051, 2022, doi: 10.1016/j.applthermaleng.2022.118051.

[19]      A. Joulaei, M. Nili-ahmadabadi, K. Chun, and M. Yeong, “Phosphor thermometry evaluation of heat transfer enhancement on a hot plate achieved by a vortex-based fluidic oscillator,” Therm. Sci. Eng. Prog., vol. 47, no. November 2023, p. 102269, 2024, doi: 10.1016/j.tsep.2023.102269.

[20]      A. Joulaei, M. Nili-Ahmadabadi, and M. Yeong Ha, “Numerical study of the effect of geometric scaling of a fluidic oscillator on the heat transfer and frequency of impinging sweeping jet,” Appl. Therm. Eng., vol. 221, p. 119848, 2023, doi: 10.1016/j.applthermaleng.2022.119848.

[21]      R. D. Stouffer, “Oscillating spray device,” US4151955A, 1979

[22]      F. R. Menter, “Performance of popular turbulence models for attached and separated adverse pressure gradient flows,” AIAA J., vol. 30, no. 8, pp. 2066–2072, 1992, doi: 10.2514/3.11180.

[23]      F. R. Menter, M. Kuntz, and R. Langtry, “Ten Years of Industrial Experience with the SST Turbulence Model,” 2003.

[24]      ANSYS, “CFD EXPERTS Simulate the Future,” 2021.

[25]      R. Gardon and J. C. Akfirat, “Heat Transfer Characteristics of Impinging Two-Dimensional Air Jets,” pp. 1–7, 2016.

[26]      R. Gardon and J. C. Akfirat, “Heat Transfer Characteristics of Impinging Two-Dimensional Air Jets. J Heat Transfer. 1966;88:101. ensional Air Jets,” J. Heat Transfer, vol. 88, p. 101, 1966.