بهبود تضمین کیفیت نرم‌افزار با استفاده از استانداردهای رایج جهانی

[1] S. Pargaonkar, “Enhancing Software Quality in Architecture Design: A Survey-Based Approach,” Int. J. Sci. Res. Publ. (IJSRP), vol. 13, no. 08, 2023, http://dx.doi.org/10.29322/IJSRP.13.08.2023.p14014

[2]R. Silva Farias, I. Ahmed, and E. Santana de Almeida, “What Makes a Great Software Quality Assurance Engineer?,” arXiv e-prints, p. arXiv: 2401.13623, 2024, https://doi.org/10.48550/arXiv.2401.13623

[3]W. Y. Wong, T. H. Sam, C. W. Too, and W. F. Pok, “Software quality assurance plan: Setting quality assurance checkpoints within the project life cycle and system development life cycle,” 2022 IEEE 18th Int. Colloq. Signal Process. Appl. (CSPA), 2022: IEEE, pp. 214-219.

[4]               S. Ibarra and M. Muñoz, “Support tool for software quality assurance in software development,” 2018 7th Int. Conf. Softw. Process Improv. (CIMPS), 2018: IEEE, pp. 13-19, https://doi.org/10.1109/CIMPS.2018.8625617

[5]Y. Zhao, Y. Hu, and J. Gong, “Research on International Standardization of Software Quality and Software Testing,” 2021 IEEE/ACIS 20th Int. Fall Conf. Comput. Inf. Sci. (ICIS Fall), 2021: IEEE, pp. 56-62, https://doi.org/10.1109/ICISFall51598.2021.9627426

[6]I. Atoum, M. K. Baklizi, I. Alsmadi, A. A. Otoom, T. Alhersh, J. Ababneh, J. Almalki, and S. M. Alshahrani, “Challenges of software requirements quality assurance and validation: A systematic literature review,” IEEE Access, vol. 9, pp. 137613-137634, 2021, https://doi.org/10.1109/ACCESS.2021.3117989

[7]N. Silega, G. F. Castro Aguilar, I. M. Alcívar, K. M. Faggioni, Y. I. Rogozov, and V. S. Lapshin, “An ontology-based approach to support the knowledge management of software quality standards,” Enfoque UTE, vol. 14, no. 3, pp. 49-56, 2023, https://doi.org/10.29019/enfoqueute.946

[8]C. Y. Laporte, G. Verret, and M. Muñoz, “A software project that partially failed: A small organization that ignored the management and technical practices of software standards,” Computer, vol. 56, no. 5, pp. 138-144, 2023, https://doi.org/10.1109/MC.2023.3253979

[9]C. Y. Laporte and A. April, “Software quality assurance.” John Wiley & Sons, 2018.

[10]R. E. Al-Qutaish, “Quality models in software engineering literature: an analytical and comparative study,” J. Am. Sci., vol. 6, no. 3, pp. 166-175, 2010.

[11]D. Jamwal, “Analysis of software quality models for organizations,” Int. J. Latest Trends Comput., vol. 1, no. 2, pp. 19-23, 2010.

[12]I. G. Ndukwe, S. A. Licorish, A. Tahir, and S. G. MacDonell, “How have views on software quality differed over time? Research and practice viewpoints,” J. Syst. Softw., vol. 195, p. 111524, 2023, https://doi.org/10.1016/j.jss.2022.111524

[13]A. Kumar and D. Gupta, “Paradigm shift from conventional software quality models to web based quality models,” Int. J. Hybrid Intell. Syst., vol. 14, no. 3, pp. 167-179, 2017, https://doi.org/10.3233/HIS-180249

[14]             J. P. Miguel, D. Mauricio, and G. Rodríguez, “A review of software quality models for the evaluation of software products,” Int. J. Softw. Eng. Appl. (IJSEA), 2014, https://doi.org/10.48550/arXiv.1412.2977

[15]S. S. Thapar, P. Singh, and S. Rani, “Challenges to development of standard software quality model,” Int. J. Comput. Appl., vol. 49, no. 10, 2012.

[16]D. Galin, “Software quality: concepts and practice.” John Wiley & Sons, 2018.

[17]N. Nyári and A. Kerti, “Review of software quality related iso standards,” Biztonságtudományi Szemle, vol. 3, no. 2, pp. 61-72, 2021.

[18]G. Karmakar, A. Wakankar, A. Kabra, and P. Pandya, “Development of Safety-Critical Systems: Architecture and Software.” Springer Nature, 2023.

[19]D. Zimon and S. Dellana, “A longitudinal exploratory study of ISO 9001 certification abandonment in small-and medium-sized enterprises,” Int. J. Qual. Reliab. Manag., vol. 37, no. 1, pp. 53-67, 2020, https://doi.org/10.1108/IJQRM-10-2018-0284

[20]D. Zimon, “Quality Management Systems' impact on the functioning of distribution channels in the FMCG market,” Calitatea, vol. 18, no. 156, p. 52, 2017.

[21]D. Zimon, “The influence of quality management systems for improvement of logistics supply in Poland,” Oeconomia Copernicana, vol. 8, no. 4, pp. 643-655, 2017.

[22]F. M. Aarts and E. Vos, “The impact of ISO registration on New Zealand firms’ performance: a financial perspective,” TQM Mag., vol. 13, no. 3, pp. 180-191, 2001.

[23]G. Zimon, A. M. Habib, and D. Haluza, “Does the quality management system affect working capital management efficiency? Evidence from Polish firms,” Cogent Bus. Manag., vol. 11, no. 1, 2024, https://doi.org/10.1080/23311975.2023.2292787

[24]G. Zimon and D. Zimon, “Quality management systems and working capital SMEs in GPO—A Case of Poland,” Adm. Sci., vol. 10, no. 4, p. 76, 2020, https://doi.org/10.3390/admsci10040076

[25]D. Zimon and G. Zimon, “The impact of implementation of standardized quality management systems on management of liabilities in group purchasing organizations,” Qual. Innov. Prosperity, vol. 23, no. 1, pp. 60-73, 2019, https://doi.org/10.12776/qip.v23i1.1210

[26]M. Salehi, N. Mahdavi, S. Zarif Agahi Dari, and H. Tarighi, “Association between the availability of financial resources and working capital management with stock surplus returns in Iran,” Int. J. Emerg. Mark., vol. 14, no. 2, pp. 343-361, 2019, https://doi.org/10.1108/IJoEM-11-2017-0439

[27]IEEE Recommended Practice for Software Requirements Specifications, IEEE Std 830:1998, 20 Oct. 1998.

[28]IEEE/ISO/IEC international standard for software, systems and enterprise–architecture description, ISO/IEC/IEEE 42010:2022(E), 2022.

[29]IEEE standard for information technology–systems design–software design descriptions, IEEE Std. 1016:2009, 2009.

[30]IEEE/ISO/IEC international standard—software and systems engineering—software testing—Part 3: Test documentation, ISO/IEC/IEEE 29119-3:2021(E), 2021.

[31]ISO/IEC/IEEE international standard—software and systems engineering—software testing—Part 2: test processes, ISO/IEC/IEEE 29119-2:2021(E), 2021.

[32]ISO/IEC/IEEE international standard—software and systems engineering—software testing—Part 1: general concepts, ISO/IEC/IEEE 29119-1:2022(E), 2022.

[33]IEEE standard for software quality assurance processes, IEEE Std 730:2014, (Revision of IEEE Std 730-2002), 2014.

[34]IEEE Standard for Configuration Management in Systems and Software Engineering, IEEE Std 828:2012, (Revision of IEEE Std 828-2005), 16 March 2012.

[35]IEEE Standard for System, Software, and Hardware Verification and Validation, IEEE Std 1012:2016, (Revision of IEEE Std 1012-2012/ Incorporates IEEE Std 1012-2016/Cor1-2017), 2016.

[36]IEEE Standard for Software Reviews and Audits, IEEE Std 1028:2008, 2008.

[37]ISO/IEC/IEEE International Standard—Systems and software engineering—Requirements for acquirers and suppliers of information for users, ISO/IEC/IEEE 26512:2017(E), 2017.

[38]N. Mellegård, “Improving Defect Management in Automotive Software Development, LiDeC—A Light-weight Defect Classification Scheme.” Chalmers Tekniska Hogskola (Sweden), 2013.

[39]R. Oberhauser, “VR-V&V: Immersive Verification and Validation Support for Traceability Exemplified with ReqIF, ArchiMate, and Test Coverage,” Int. J. Adv. Syst. Meas., vol. 16, no. 3 & 4, pp. 103-115, 2023.

[40]L. Pourvatan, “Test Process Assessment of Industrial Control Systems via Safety Standards,” ed, 2021.

[41]S. K. Sharma and M. Khaliq, “Design and development of software quality forensics framework and model,” Multidiscip. Sci. J., vol. 6, no. 7, pp. 2024111-2024111, 2024, https://doi.org/10.31893/multiscience.2024111

[42]S. Fahmy, A. Deraman, J. Yahaya, A. Nasir, and N. Shamsudin, “The evolution of software configuration management,” Int. J. Adv. Trends Comput. Sci. Eng., vol. 9, no. 1.3, 2020, https://doi.org/10.30534/ijatcse/2020/0891.32020

[43]Software engineering-Guidelines for the application of ISO 9001:2015 to computer software, ISO/IEC/IEEE 90003:2018, (Revision of ISO/IEC 90003:2014), 2018.

[44]S. K. Sundaram and M. Suresh, “Partial CMMI V2. 0 Assessment Using Multi-grade Fuzzy for Healthcare and Insurance Segment in Software Services,” in Intelligent Manufacturing and Energy Sustainability: Proceedings of ICIMES 2022: Springer, 2023, pp. 401-412. https://doi.org/10.1007/978-981-19-8497-6_37

[45]J. Mona, R. H. A. Al-Sagheer, and S. M. Alghazali, “Software Quality Assurance Models and Application to Defect Prediction Techniques,” Int. J. Intell. Syst. Appl. Eng., vol. 11, no. 1, pp. 169–178-169–178, 2023.

[46]I. Keshta, “A model for defining project lifecycle phases: Implementation of CMMI level 2 specific practice,” J. King Saud Univ. Comput. Inf. Sci., vol. 34, no. 2, pp. 398-407, 2022, https://doi.org/10.1016/j.jksuci.2019.10.013

[47]B. Day, S. C. Ke-Zun, L. Lovelock, and C. Lutteroth, “Climbing the ladder: CMMI level 3,” 2009 IEEE Int. Enterp. Distrib. Object Comput. Conf., 2009: IEEE, pp. 97-106, https://doi.org/10.1109/EDOC.2009.29

[48]P. Clarke and R. V. O'Connor, “An empirical examination of the extent of software process improvement in software SMEs,” J. Softw. (Malden), vol. 25, no. 9, pp. 981-998, 2013, https://doi.org/10.1002/smr.1580

[49]C. Vivatanavorasin, N. Prompoon, and A. Surarerks, “A process model design and tool development for supplier agreement management of CMMI: Capability Level 2,” 2006 13th Asia Pac. Soft. Eng. Conf. (APSEC'06), 2006: IEEE, pp. 385-392, https://doi.org/10.1109/APSEC.2006.12

[50]C. Quintal and J. A. Macías, “Measuring and improving the quality of development processes based on usability and accessibility,” Univers Access Inf. Soc., vol. 20, no. 2, pp. 203-221, 2021, https://doi.org/10.1007/s10209-020-00726-7

[51]S. Peldzius and S. Ragaisis, “Comparison of maturity levels in CMMI-DEV and ISO/IEC 15504,” Appl. Math. and Comput. Eng., pp. 117-122, 2011.

[52]T. P. Rout and A. Tuffley, “Harmonizing iso/iec 15504 and cmmi,” Softw. Process: Improv. Pract., vol. 12, no. 4, pp. 361-371, 2007, https://doi.org/10.1002/spip.329

[53]M. I. F. Nuzula and S. Rochimah, “Evaluation of Service Quality in Human Resource Information Systems Using the ISO/IEC 25010,” Int. Semin. Appl. Technol. Inf. Commun. (iSemantic), 2023: IEEE, pp. 215-220, https://doi.org/10.1109/iSemantic59612.2023.10295365

[54]V. Santa Barletta, D. Caivano, L. Colizzi, G. Dimauro, and M. Piattini, “Clinical-chatbot AHP evaluation based on “quality in use” of ISO/IEC 25010,” Int. J. Med. Inform., vol. 170, p. 104951, 2023, https://doi.org/10.1016/j.ijmedinf.2022.104951

[55]A. Sopandi, N. A. Yahaya, and A. Subiyakto, “Developing the Readiness and Success Model of Information System Implementation in the Indonesian Equestrian Industry,” J. Appl. Data Sci., vol. 5, no. 1, pp. 133-145, 2024, https://doi.org/10.47738/jads.v5i1.145

[56]Systems and software engineering-Systems and software Quality Requirements and Evaluation (SQuaRE)-Product quality model, ISO/IEC 25010:2023, International Organization for Standardization (ISO), 2023.