بهینه‌سازی چندهدفه زنجیره تأمین معکوس پایدار زباله‌های جامد شهری با در نظر گرفتن عدم قطعیت : رویکرد بهینه‌سازی استوار

[1] S. Amirian, M. Amiri, and M. T. Taghavifard, “Designing a Sustainable and Reliable Supply Chain Network Under Uncertainty (Case Study: West of Carton),” Sci. J. Supply Chain Manag., vol. 25, no. 4, 2024. DOR:20.1001.1.20089198.1402.25.81.6.4.(In Persian)

[2]B. KIPROP NGETICH, N. NURYAKIN, and I. N. QAMARI, “How research in sustainable energy supply chain distribution is evolving: Bibliometric review,” J. Distrib. Sci., vol. 20, no. 7, pp. 47–56, 2022. https://doi.org/10.15722/jds.20.07.202207.47

[3] H. Eghbali, J. Arkat, and R. Tavakkoli-Moghaddam, “Sustainable supply chain network design for municipal solid waste management: A case study,” J. Clean. Prod., vol. 381, p. 135211, 2022. https://doi.org/10.1016/j.jclepro.2022.135211

[4] S. Sadeghi Ahangar, A. Sadati, and M. Rabbani, “Sustainable design of a municipal solid waste management system in an integrated closed-loop supply chain network using a fuzzy approach: a case study,” J. Ind. Prod. Eng., vol. 38, no. 5, pp. 323–340, 2021. https://doi.org/10.1080/21681015.2021.1891146

[5] Z. Xu, A. Elomri, S. Pokharel, Q. Zhang, X. G. Ming, and W. Liu, “Global reverse supply chain design for solid waste recycling under uncertainties and carbon emission constraint,” Waste Manag., vol. 64, pp. 358–370, 2017. https://doi.org/10.1016/j.wasman.2017.02.024

[6] A. Kumar and K. Kumar, “An uncertain sustainable supply chain network design for regulating greenhouse gas emission and supply chain cost,” Clean. Logist. Supply Chain, vol. 10, p. 100142, 2024, doi: 10.1016/j.clscn.2024.100142. https://doi.org/10.1016/j.clscn.2024.100142

[7] S. Seuring, “A review of modeling approaches for sustainable supply chain management,” Decis. Support Syst., vol. 54, no. 4, pp. 1513–1520, 2013. https://doi.org/10.1016/j.dss.2012.05.053

[8] Musa Khaleghi, “Benefits and Achievements of Reverse Logistics in Supply Chain,” presented at the International Conference on Logistics and Supply Chain (Fifth National Conference and Third International Conference).2012,[Online].Available: https://sid.ir/paper/874702/fa.(In Persian)

[9] K. Govindan, M. Fattahi, and E. Keyvanshokooh, “Supply chain network design under uncertainty: A comprehensive review and future research directions,” Eur. J. Oper. Res., vol. 263, no. 1, pp. 108–141, 2017. https://doi.org/10.1016/j.ejor.2017.04.009

[10] C. Prahinski and C. Kocabasoglu, “Empirical research opportunities in reverse supply chains,” Omega, vol. 34, no. 6, pp. 519–532, 2006. https://doi.org/10.1016/j.omega.2005.01.003

[11] M. Eskandarpour, P. Dejax, J. Miemczyk, and O. Péton, “Sustainable supply chain network design: An optimization-oriented review,” Omega, vol. 54, pp. 11–32, 2015. https://doi.org/10.1016/j.omega.2015.01.006

[12] N. Kazemi, N. M. Modak, and K. Govindan, “A review of reverse logistics and closed loop supply chain management studies published in IJPR: a bibliometric and content analysis,” Int. J. Prod. Res., vol. 57, no. 15–16, pp. 4937–4960, 2019,                                             https://doi.org/10.1080/00207543.2018.1471244

[13] S. A. Raza, “A systematic literature review of closed-loop supply chains,” Benchmarking An Int. J., vol. 27, no. 6, pp. 1765–1798, 2020.   https://doi.org/10.1108/BIJ-10-2019-0464

[14] D. D. Nirmal, K. Nageswara Reddy, and S. K. Singh, “Application of fuzzy methods in green and sustainable supply chains: critical insights from a systematic review and bibliometric analysis,” Benchmarking An Int. J., vol. 31, no. 5, pp. 1700–1748, 2024. https://doi.org/10.1108/BIJ-09-2022-0563

[15] B. Mota, M. I. Gomes, A. Carvalho, and A. P. Barbosa-Povoa, “Towards supply chain sustainability: Economic, environmental and social design and planning,” J. Clean. Prod., vol. 105, pp. 14–27, 2015, https://doi.org/10.1016/j.jclepro.2014.07.052

[16] S. Seuring and M. Müller, “From a literature review to a conceptual framework for sustainable supply chain management,” J. Clean. Prod., vol. 16, no. 15, pp. 1699–1710, 2008. https://doi.org/10.1016/j.jclepro.2008.04.020

[17] M. Arab Momeni, V. Jain, and M. Bagheri, “A Multi-Objective Model for Designing a Sustainable Closed-Loop Supply Chain Logistics Network,” Logistics, vol. 8, no. 1, p. 29, 2024. https://doi.org/10.3390/logistics8010029

[18] Y. Hong, W. Yan, and Q. Ge, “Designing sustainable logistics networks for classified municipal solid wastes collection and transferring with multi-compartment vehicles,” Sustain. Cities Soc., vol. 99, p. 104921, 2023. https://doi.org/10.1016/j.scs.2023.104921

[19] G. Abbasi, F. Khoshalhan, and S. Javad Hosseininezhad, “Municipal solid waste management and energy production: A multi-objective optimization approach to incineration and biogas waste-to-energy supply chain,” Sustain. Energy Technol. Assessments, vol. 54, p. 102809, 2022. https://doi.org/10.1016/j.seta.2022.102809

[20] X. Yang, X. Guo, and K. Yang, “Redesigning the municipal solid waste supply chain considering the classified collection and disposal: A case study of incinerable waste in Beijing,” Sustain., vol. 13, no. 17, p. 9855, 2021.           https://doi.org/10.3390/su13179855

[21] S. Sajedi, A. H. Sarfaraz, S. Bamdad, and K. Khalili-Damghani, “Designing a sustainable reverse logistics network considering the conditional value at risk and uncertainty of demand under different quality and market scenarios,” Int. J. Eng., vol. 33, no. 11, pp. 2252–2271, 2020.                                                         https://doi.org/10.5829/ije.2020.33.11b.17

[22] N. Ayvaz-Cavdaroglu, A. Coban, and I. Firtina-Ertis, “Municipal solid waste management via mathematical modeling: A case study in İstanbul, Turkey,” J. Environ. Manage., vol. 244, pp. 362–369, 2019 https://doi.org/10.1016/j.jenvman.2019.05.065

[23] M. Mohammadi, S.-L. Jämsä-Jounela, and I. Harjunkoski, “Optimal planning of municipal solid waste management systems in an integrated supply chain network,” Comput. Chem. Eng., vol. 123, pp. 155–169, 2019. https://doi.org/10.1016/j.compchemeng.2018.12.022

[24] L. Truc Doan, Y. Amer, S.-H. Lee, and P. Ky Phuc, “Optimizing the total cost of an e-waste reverse supply chain considering transportation risk,” Oper. Supply Chain Manag. An Int. J., vol. 11, no. 3, pp. 151–160, 2018.                  http://doi.org/10.31387/oscm0320211

[25]A. Schreiber and J. Yang, “Multi-echelon logistics and disposal optimisation model for municipal solid waste management in Beijing,” Int. J. Environ. Waste Manag., vol. 22, no. 1–4, pp. 307–327, 2018. https://doi.org/10.1504/IJEWM.2018.094119

[26] M.Shabangiz,  I. Heydari, S. A. Hashemi Foroushani, and A. Goli. Presenting a Multi-Objective Mathematical Model to Design a Green Reverse Logistics System Considering Energy Recovery. Industrial Innovations, 1(4):387-408,2024.      https://doi.org/10.61186/jii.1.4.387.(In Persian)

[27] H. Firouzi, J. Rezaeian, M. M. Movahedi, and A. Rashidi Komijan, “Multi-Objective Modeling of the Supply Chain of the Hospital Waste Management Considering the Dimensions of Sustainability Accompanied by Fuzzy Set Theory,” Ind. Manag. Stud., vol. 21, no. 71, pp. 177–223, 2023. https://doi.org/10.22054/jims.2023.72812.2850.(In Persian)

[28] M.Safari, M.Fallah, and H.Kazemipoor. Presenting a Mathematical Model for the Collection and Reproduction of Depreciated Products in a Closed Loop Supply Chain Using the GameTheory. Supply Chain Management, 24(74):47-60,2022.  https://dor.isc.ac/dor/20.1001.1.20089198.1401.24.74.4.1.(In Persian)

[29] S. G. Mousavian,  M. Zeinalnezhad. Reverse Supply Chain Design in the Fast Fashion Industry for Customer Relationship Management Using Data Mining and Mathematical Modeling. Supply Chain Management, 24(76):35-57,2023. https://dor.isc.ac/dor/20.1001.1.20089198.1401.24.76.3.4.(In Persian)

[30] M.Nikzamir, V. baradaran,  Y. Panahi . A Supply Chain Network Design for Managing Hospital Solid Waste. Industrial Management Studies,19(60): 85-120, 2021.         https://doi.org/10.22054/jims.2021.40574.2283.(In Persian)

[31] S. J. Hosseini dehshiri, M. aghaei. Identifying and prioritizing solutions to overcome obstacles of the implementation of reverse logistics with a hybrid approach: Fuzzy Delphi, SWARA and WASPAS In the paper industry. Supply Chain Management,21(64):85-98, 2019. https://dor.isc.ac/dor/20.1001.1.20089198.1398.21.64.6.2.(In Persian)

[32] N.Manavizadeh, S.aghamohamadi-bosjin, , P.Karimi-Ashtiani. Solving a Location-Routing-Inventory Problem of Hazardeous Waste Collection Network Considering Domestic and Foreign Transportation Fleets. Industrial Management Studies,18(58):215-245, 2020.         https://doi.org/10.22054/jims.2019.44492.2346.(In Persian)

[33] Y.esmaeelzadeh,  H. sahebi. A reverse logistics supply chain network design for municipal solid waste Case Study: Shiraz City. Journal of Modeling in Engineering, 17(56):313-325,2019. https://doi.org/10.22075/jme.2018.14255.1401.(In Persian)

[34] .M.Paydar,A.Yousefibabadi,andA.Davoudi. Designing an Integrated Direct and Reverse Logistic Robust Optimization Model under Uncertainty. Supply Chain Management, 17(47): 4-15, 2015. (In Persian)

[35] Q. Yuchi, Z. He, Z. Yang, and N. Wang, “A Location‐Inventory‐Routing Problem in Forward and Reverse Logistics Network Design,” Discret. Dyn. Nat. Soc., vol. 2016,no.1,p.3475369,2016. https://doi.org/10.1155/2016/3475369

[36] A. Tayebi Abolhasani. Introduction to Research Methodology: Standard procedures for qualitative data analysis. Science and Technology Policy Letters,09(2):67-96,2019. https://dor.isc.ac/dor/20.1001.1.24767220.1398.09.2.5.1 (In Persian)

[37] A. Ben-Tal, L. haoui, and A. Nemirovski, Robust Optimization. 2021.

[38] D. Bertsimas and M. Sim, “The price of robustness,” Oper. Res., vol. 52, no. 1, pp. 35–53, 2004. https://doi.org/10.1287/opre.1030.0065