ارائه روشی نوین در کنترل و تولید برق در شناورهای تندرو و امکان سنجی بهره گیری از انرژی های تجدیدپذیر

[1]      H. Abdolrahimi and D. Arabkhaburi, “A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System,” vol. 34, no. 05, pp. 901–907, 2021.

[2]      R. A. McMahon, P. C. Roberts, X. Wang, and P. J. Tavner, “Performance of BDFM as generator and motor,” IEE Proceedings-Electric Power Appl., vol. 153, no. 2, pp. 289–299, 2006

[3]      P. C. Roberts, R. A. McMahon, P. J. Tavner, J. M. Maciejowski, and T. J. Flack, “Equivalent circuit for the brushless doubly fed machine (BDFM) including parameter estimation and experimental verification,” IEE Proceedings-Electric Power Appl., vol. 152, no. 4, pp. 933–942, Feb. 2005

[4]      R. A. McMahon, X. Wan, E. Abdi-Jalebi, P. J. Tavner, P. C. Roberts, and M. Jagiela, “The BDFM as a Generator in Wind Turbines,” in 2006 12th International Power Electronics and Motion Control Conference, Aug. 2006

[5]      J. Poza, E. Oyarbide, I. Sarasola, and M. Rodriguez, “Vector control design and experimental evaluation for the brushless doubly fed machine,” IET Electr. Power Appl., vol. 3, no. 4, pp. 247–256, 2009

[6]      S. Shao, E. Abdi, and R. McMahon, “Low-cost variable speed drive based on a brushless doubly-fed motor and a fractional unidirectional converter,” IEEE Trans. Ind. Electron., vol. 59, no. 1, pp. 317–325, 2011

[7]      S. Shao, E. Abdi, F. Barati, and R. McMahon, “Stator-flux-oriented vector control for brushless doubly fed induction generator,” IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4220–4228, 2009

[8]      K. Protsenko and Dewei Xu, “Modeling and Control of Brushless Doubly-Fed Induction Generators in Wind Energy Applications,” IEEE Trans. Power Electron., vol. 23, no. 3, pp. 1191–1197, May 2008

[9]      I. A. Gowaid, A. S. Abdel-Khalik, A. M. Massoud, and S. Ahmed, “Ride-Through Capability of Grid-Connected Brushless Cascade DFIG Wind Turbines in Faulty Grid Conditions—A Comparative Study,” IEEE Trans. Sustain. Energy, vol. 4, no. 4, pp. 1002–1015, Oct. 2013

[10]    S. Bayhan, P. Kakosimos, and M. Rivera, “Predictive torque control of brushless doubly fed induction generator fed by a matrix converter,” in 2018 IEEE 12th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG 2018), 2018

[11]    W. Xu, J. Gao, Y. Liu, and K. Yu, “Model predictive current control of brushless doubly-fed machine for stand-alone power generation system,” in IECON 2017-43rd Annual Conference of the IEEE Industrial Electronics Society, 2017

[12]    Y. Zhang and H. Yang, “Model-Predictive Flux Control of Induction Motor Drives With Switching Instant Optimization,” IEEE Trans. Energy Convers., vol. 30, no. 3, pp. 1113–1122, Sep. 2015

[13]    R. Vargas, J. Rodriguez, C. A. Rojas, and M. Rivera, “Predictive Control of an Induction Machine Fed by a Matrix Converter With Increased Efficiency and Reduced Common-Mode Voltage,” IEEE Trans. Energy Convers., vol. 29, no. 2, pp. 473–485, Jun. 2014

[14]    G. Abad, M. Á. RodrÍguez, J. Poza, M. A. Rodriguez, and J. Poza, “Two-level VSC-based predictive direct power control of the doubly fed induction machine with reduced power ripple at low constant switching frequency,” IEEE Trans. Energy Convers., vol. 23, no. 2, pp. 570–580, Jun. 2008

[15]    Xiao-Bing Kong, Lin Wang, and X.-J. Liu, “Predictive control for DFIG-based wind power generation,” in 2012 24th Chinese Control and Decision Conference (CCDC), May 2012