اخبار و اعلانات
آمار
| تعداد نشریات | 38 |
| تعداد شماره‌ها | 1,244 |
| تعداد مقالات | 9,010 |
| تعداد مشاهده مقاله | 7,869,864 |
| تعداد دریافت فایل اصل مقاله | 4,719,975 |
طراحی بهینه موتور شار معکوس با هدف کاهش ریپل گشتاور | ||
| الکترومغناطیس کاربردی | ||
| دوره 10، شماره 2 - شماره پیاپی 25، آبان 1401، صفحه 81-91 اصل مقاله (1.21 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| نویسندگان | ||
| محمد شکری* 1؛ سید اصغر غلامیان2 | ||
| 1نویسنده مسئول: دانشجوی کارشناسی ارشد، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران | ||
| 2دانشیار، دانشگاه صنعتی نوشیروانی بابل، بابل، ایران | ||
| تاریخ دریافت: 08 مرداد 1400، تاریخ بازنگری: 03 آبان 1400، تاریخ پذیرش: 02 بهمن 1400 | ||
| چکیده | ||
| ماشین‌های شار معکوس (FRM) به علت وجود آهنربای دائم در دندانه استاتور و ساختار یکپارچه روتور ، ویژگی‌های ماشین‌های سنکرون با آهنربا دائم و ماشین‌های سوئیچ رلوکتانس را در خود ادغام کرده است. در این مقاله یک نمونه ماشین شار معکوس250 واتی با تعداد 12 شیار استاتور و 17 دندانه روتور طراحی‌شده است. با استفاده از روش بهینه‌سازی تاگوچی و به کمک نرم‌افزار Minitab ، ماشین شار معکوس طراحی‌شده جهت دستیابی به کمینه ریپل گشتاوری و بیشینه گشتاور خروجی بهینه‌سازی شد. مهم‌ترین دستاورد این مقاله بهینه‌سازی با برنامه‌ریزی دقیق روش تاگوچی برای تعیین ترکیب بهینه پارامترهای موردنظر و همچنین انطباق قابل‌قبول نتایج پیش‌بینی‌شده با نتایج حاصل از شبیه‌سازی نرم افزار Altair Flux هست. | ||
| کلیدواژه‌ها | ||
| طراحی بهینه؛ موتور شار معکوس؛ روش تاگوچی؛ گشتاور رلوکتانسی؛ ریپل گشتاور؛ گشتاور دندانه ای | ||
| عنوان مقاله [English] | ||
| Optimized Design to reduce cogging torque in flux reversal motor | ||
| نویسندگان [English] | ||
| Mohammad Shokri1؛ Sayyed Asghar Gholamian2 | ||
| 1Faculty of Electrical and Computer Engineering Babol Noshirvani University of Technology, Babol, IRAN | ||
| 2Electrical and Computer Engineering Department, Babol Noshirvani University of Technology, Babol, Iran | ||
| چکیده [English] | ||
| Flux Reversal Machine (FRM) integrates the features of permanent magnet synchronous machines and switch reluctance machines due to the presence of permanent magnets in the stator tooth and the robust structure of the rotor. In this paper, a model of a 250-watt flux reversal machine with 12 stator slots and 17 rotor teeth is designed. Using the Taguchi optimization method with the help of Minitab, the flux reversal machine is designed to achieve minimum torque ripple and maximum output torque. The most important achievement of this paper is optimization with precise planning of the Taguchi method to determine the optimal combination of the desired parameters as well as acceptable compliance of the predicted results with the simulation results of Altair Flux. | ||
| کلیدواژه‌ها [English] | ||
| Optimal design, Flux Reversal Motor, Taguchi method, Reluctance torque, Torque ripple, Cogging torque | ||
| مراجع | ||
|
[1] R. Deodhar, S. Andersson, I. Boldea, and T. Miller, “The Flux-Reversal Machine: A New Brushless Doubly-salient Permanent-Magnet Machine,” IEEE Transactions on Industry Applications, vol. 33, pp. 925–934, July/August 1997. [2] T. H. Kim, S. H. Won, K. Bong, and J. Lee, “Reduction of Cogging Torque in Flux-reversal Machine by Rotor Teeth Pairing,” IEEE International Magnetics Conference, vol. 41, pp. 3964–3966, October 2005. [3] X. Zhu and W. Hua, “An Improved Configuration for Cogging Torque Reduction in Flux-reversal Permanent Magnet Machines,” IEEE Transactions on Magnetics, vol. 53, pp. 1-4, June 2017. [4] Y. Gao, R. Qu, D. Li, J. Li, and G. Zhou, “Consequent-Pole Flux Reversal Permanent-Magnet Machine for Electric Vehicle Propulsion,” IEEE Transactions on Applied Superconductivity, vol. 26, pp. 1-5, June 2016. [5] Li, H. Y. and Zhu, Z. Q. “Analysis of Flux-reversal Permanent Magnet Machines with Different Consequent-pole PM Topologies,” IEEE Transactions on Magnetics, vol. 54, pp. 1-5, November 2018. [6] Z. Yuansheng, K. Baoquan, and Z. Xiaokun, “A Study of Torque Characteristics of a Novel Flux Reversal Machine,” 22nd International Conference on Electrical Machines and Systems (ICEMS), pp. 1-5, 2019. [7] K. Xie, D. Li, R. Qu, Y. Gao, and Y. Pan, “A Novel Flux Reversal PM Machine with Halbach Array Magnets in Stator Slot Opening,” 20th International Conference on Electrical Machines and Systems (ICEMS), pp. 1-6, 2017. [8] M. Amirian and M. Ardebili, “Impact of Stator and Rotor Teeth Parameters on Operation and Characteristics of Flux Reversal Machine,” 10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC) , pp. 56-60, 2019 . [9] T. H. Kim, “A Study on the Design of an Inset-permanent-Magnet-type Flux-reversal Machine,” IEEE Transactions on Magnetics, vol. 45, pp. 2859–2862, June 2009. [10] Ch. Sikder, I. Husain, and W. Ouyang, “Cogging Torque Reduction in Flux-Switching Permanent Magnet Machines by Rotor Pole Shaping,” IEEE Transactions on Industry Applications, vol. 51, pp. 3609-3619, September-Octobr 2015. [11] L. Hao, M. Lin, D. Xu, N. Li, and W. Zhang, “Cogging Torque Reduction of Axial-Field Flux-Switching Permanent Magnet Machine by Rotor Tooth Notching,” In IEEE Transactions on Magnetics, vol. 51, pp. 1-4, Nov. 2015. [12] D.S. More and B.G. Fernandes, “Power Density Improvement of Three Phase Flux Reversal Machine with Distributed Winding,” IET Electric Power Applications, vol. 4, pp. 109-120, February 2010. [13] Y. Gao, D. Li, R. Qu, and J. Li, “Design Procedure of Flux Reversal Permanent Magnet Machines,” IEEE Transactions on Industry Applications, vol. 53, pp. 1584-1590, September-Octobr 2017. [14] M. Ghasemian, F. Tahami, and G. Rezazadeh, “A Comparative Analysis of Permanent Magnet Flux Reversal Generators with Distributed and Concentrated Winding,” IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, pp. 1657-1661, 2017. [15] D. Martínez, “Design of a Permanent-magnet Synchronous Machine with Non-overlapping Concentrated Windings for the Shell Eco Marathon Urban Prototype,” MSc. Thesis, KTH, Electrical Energy Conversion, Stockholm, Sweden, 2012. [16] J. Pyrhonen, T. Jokinen, and V. Hrabovca, “Design of Rotating Electrical Machines,” John Wiley & Sons Ltd., Chichester, UK, February 2008. [17] Roos P. J., “Taguchi Techniques for Quality Engineering,” McGraw-Hill, New York, 1998. [18] B. C. Gupta, “Sampling Methods,” in Statistical Quality Control: Using MINITAB, R, JMP and Python,” Wiley, pp.89-121, 2021. [19] D. S. More and B. G. Fernandes, “Power Density Improvement of Three Phase Flux Reversal Machine with Distributed Winding,” Proceedings IET Electric Power Applications, vol. 4, pp. 109-120, Feb. 2010. [20] S. Taghipour borojeni and M. H. Hajjare, “Optimization of Cogging Torque in Surface Mounted PM Machines using PM Segmetation,” Journal of Applied Electromagnetics, vol. 2, pp. 31-38, 2014 (In Persian). [21] I. Boldea, J. Zhang, and S. A. Nasar, “Theoretical Characterization of Flux Reversal Machine in Low Speed Servo Drives: The Pole PM Configuration,” IEEE Transactions on Industry Applications, vol. 38, pp. 1549–1557, November/December 2002. | ||
|
آمار تعداد مشاهده مقاله: 3,563 تعداد دریافت فایل اصل مقاله: 3,349 |
||