
تعداد نشریات | 34 |
تعداد شمارهها | 1,306 |
تعداد مقالات | 9,427 |
تعداد مشاهده مقاله | 9,188,650 |
تعداد دریافت فایل اصل مقاله | 5,620,940 |
پیش آماده کردن و شابلون کردن آرماتوربندی پایه پل درمحل پروژه- مطالعه موردی دوربرگردان غیر همسطح شاهد-آزادی مشهد | ||
مهندسی عمران و فناوریهای نوین | ||
دوره 5، شماره 5، فروردین 1404 | ||
نوع مقاله: مقاله پژوهشی | ||
نویسندگان | ||
صادق مجیدی* ؛ علیرضا اکبرنژاد | ||
کارمند سازمان عمران شهرداری مشهد | ||
تاریخ دریافت: 28 اردیبهشت 1404، تاریخ بازنگری: 09 خرداد 1404، تاریخ پذیرش: 09 خرداد 1404 | ||
چکیده | ||
این مطالعه به بررسی و مقایسه دو روش سنتی و نوین آرماتوربندی پایههای پلها، با تأکید بر تجربیات حاصل از پروژه دوربرگردان غیرهمسطح شاهد-آزادی مشهد، پرداخته است. در روش سنتی، که شامل قرار دادن آرمتورها به صورت دستی در محل نهایی است، به مشکلات متعددی مانند طولانیشدن زمان ساخت، عدم دقت در موقعیتگیری آرماتورها، هزینههای بالا و مسائل بهداشتی-ایمنی برخورد میشود. این مشکلات در پروژه دوربرگردان شاهد-آزادی، که یکی از مسیرهای اصلی ورودی شهر مشهد است و نیازمند کاهش زمان ساخت و افزایش کیفیت ساخت بود، به چشم میخورد. در مقابل، روش جدید آرماتوربندی، که شامل استفاده از تکنیکهای صنعتی و مونتاژی است، این مشکلات را حل میکند. در این روش، بخش عمده آرماتوربندی پایهها در محیط کارخانهای یا روی زمین خارج از محل نهایی انجام میشود و سپس به صورت شابلونشده با استفاده از جرثقیلها به محل نصب منتقل و نصب میگردد. این رویکرد منجر به کاهش چشمگیر زمان ساخت، افزایش دقت قرارگیری آرمتورها، کاهش هزینهها و بهبود شرایط بهداشتی و ایمنی کارگران میشود. علاوه بر این، این روش به کاهش وابستگی به شرایط محیطی محل ساخت کمک میکند، که در پروژههایی مانند دوربرگردان شاهد-آزادی، که در شرایط ترافیکی و زمانبندی مناسب وفشرده اجرا میشود، اهمیت بیشتری دارد.نتایج این مطالعه نشان میدهد که روش جدید آرماتوربندی پایهها، با توجه به مزایای آن در کاهش زمان، هزینه و افزایش کیفیت ساخت، یک راهکار موثر و کاربردی برای پروژههای پلسازی است و میتواند به عنوان استانداردی جدید در صنعت ساخت و ساز پلها در شهر مشهد معرفی شود. | ||
کلیدواژهها | ||
دوربرگردان شاهد-آزادی؛ مونتاژ پایه پل؛ روش سنتی | ||
عنوان مقاله [English] | ||
Pre-preparing and templating the bridge footing reinforcement at the project site - a case study of the non-level Shahed-Azadi roundabout in Mashhad | ||
نویسندگان [English] | ||
sadegh majidi؛ Alireza Akbarnejad | ||
Employee of Mashhad Municipality Civil Engineering Organization | ||
چکیده [English] | ||
This study examines and compares two methods of reinforcement for bridge foundations, with an emphasis on the experiences gained from the Shohad-Azadi Skewed Interchange project in Mashhad. In the traditional method, which involves manually placing reinforcements at the final site, numerous issues such as prolonged construction time, inaccuracies in reinforcement positioning, high costs, and health-safety concerns arise. These problems were particularly evident in the Shohad-Azadi Interchange project, which is one of the main entry routes to the city of Mashhad and required reduced construction time and improved build quality. In contrast, the modern reinforcement method, which employs industrial techniques and assembly processes, addresses these challenges. In this approach, the majority of the foundation reinforcement work is carried out in a controlled factory environment or on the ground away from the final location. The pre-assembled reinforcements are then transported to the installation site and installed using cranes. This method significantly reduces construction time, enhances the accuracy of reinforcement placement, lowers costs, and improves worker health and safety conditions. Additionally, it reduces dependency on the environmental conditions of the construction site, which is especially beneficial for projects like the Shohad-Azadi Interchange, executed under tight traffic and scheduling constraints. The results of this study indicate that the new reinforcement method, due to its advantages in reducing time and cost while improving construction quality, is an effective and practical solution for bridge construction projects. It can be introduced as a new standard in the bridge construction industry in Mashhad. | ||
کلیدواژهها [English] | ||
Shahid-Azadi Roundabout, bridge base assembly, traditional method | ||
مراجع | ||
| ||
آمار تعداد مشاهده مقاله: 29 |