- Paul, M.-A., Alexandre, M., Degee, P., Henrist, C., Rulmont, A., and Dubois, P., (2003). "New nanocomposite materials based on plasticized poly (L-lactide) and organo-modified montmorillonites: thermal and morphological study," Polymer, vol. 44, pp. 443-450.
- Krishnamachari, P., Zhang, J., Lou, J., Yan, J., and Uitenham, L., (2009). "Biodegradable poly (lactic acid)/clay nanocomposites by melt intercalation: a study of morphological, thermal, and mechanical properties," International Journal of Polymer Analysis andCharacterization, vol. 14, pp. 336-350.
- Becker, J. M., Pounder, R. J., and Dove, A. P., (2010). "Synthesis of poly (lactide) s with modified thermal and mechanical properties," Macromolecular rapid communications, vol. 31, pp. 1923-1937.
- Alexandre, M. and Dubois, P., (2000). "Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials," Materials Science and Engineering: R: Reports, vol. 28, pp. 1-63.
- Bourbigot, S., Samyn, F., Turf, T., and Duquesne, S., (2010). "Nanomorphology and reaction to fire of polyurethane and polyamide nanocomposites containing flame retardants," Polymer degradation and stability, vol. 95, pp. 320-326.
- Dintcheva, N. T., Al-Malaika, S., and La Mantia, F. P., (2009). "Effect of extrusion and photo-oxidation on polyethylene/clay nanocomposites," Polymer degradation and stability, vol. 94, pp. 1571-1588.
- Ray, S. S. and Bousmina, M., (2005). "Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world," Progress in materials science, vol. 50, pp. 962-1079.
- Zaidi, L., Kaci, M., Bruzaud, S., Bourmaud, A., and Grohens, Y., (2010). "Effect of natural weather on the structure and properties of polylactide/Cloisite 30B nanocomposites," Polymer degradation and stability, vol. 95, pp. 1751-1758.
- Pandey, J. K., Reddy, K. R., Kumar, A. P., and Singh, R., (2005). "An overview on the degradability of polymer nanocomposites," Polymer degradation and stability, vol. 88, pp. 234-250.
- Touati, N., Kaci, M., Bruzaud, S., and Grohens, Y., (2011). "The effects of reprocessing cycles on the structure and properties of isotactic polypropylene/cloisite 15A nanocomposites," Polymer degradation and stability, vol. 96, pp. 1064-1073.
- Sampers, J., (2002). "Importanceof weathering factors other than UV radiation and temperature in outdoor exposure," Polymer degradation and stability, vol. 76, pp. 455-465.
- Trozzolo, A. M., (1972). "Stabilization against oxidative photodegradation," Polymer Stabilization. New York: Wiley-Interscience, pp. 198-202.
- Al-Madfa, H., Mohamed, Z., and Kassem, M., (1998). "Weather ageing characterization of the mechanical properties of the low density polyethylene," Polymer degradation and stability, vol. 62, pp. 105-109.
- Hamid, S., Qureshi, F., Amin, M., and Maadhah, A., (1989). "Weather-induced degradation of LLDPE: Calorimetric analysis," Polymer-plastics technology and engineering, vol. 28, pp. 475-492.
- Pluta, M., Murariu, M., Alexandre, M., Galeski, A., and Dubois, P., (2008). "Polylactide compositions. The influence of ageing on the structure, thermal and viscoelastic properties of PLA/calcium sulfate composites," Polymer degradation and stability, vol. 93, pp. 9.931-25.
- Tsuji, H., Echizen, Y., and Nishimura, Y., (2006). "Enzymatic degradation of poly (l-lactic acid): Effects of UV Irradiation," Journal of Polymers and the Environment, vol. 14, pp. 239-248.
- Tsuji, H., Echizen, Y., and Nishimura, Y., (2006). "Photodegradation of biodegradable polyesters: A comprehensive study on poly (l-lactide) and poly (ɛ-caprolactone)," Polymer degradation and stability, vol. 91, pp. 1128-1137.
- Janorkar, A. V., Metters, A. T., and Hirt, D. E., (2007). "Degradation of poly (L‐lactide) films under ultraviolet‐induced photografting and sterilization conditions," Journal of applied polymer science, vol. 106, pp. 1042-1047.
- Gardette, M., Therias, S., Gardette, J.-L., Murariu, M., and Dubois, P., (2011). "Photooxidation of polylactide/calcium sulphate composites," Polymer degradation and stability, vol. 96, pp. 616-623.
- Ikada, E., (1997). "Photo-and bio-degradable polyesters. Photodegradation behaviors of aliphatic polyesters," Journal of Photopolymer Science and Technology, vol. 10, pp. 265-270.
- Grossetete, T., Rivaton, A., Gardette, J., Hoyle, C., Ziemer, M., Fagerburg, D., and Clauberg, H., (2000). "Photochemical degradation of poly (ethylene terephthalate)-modified copolymer," Polymer, vol. 41, pp. 3541-3554.
- Bocchini, S., Fukushima, K., Blasio, A. D., Fina, A., Frache, A., and Geobaldo, F., (2010). "Polylactic acid and polylactic acid-based nanocomposite photooxidation," Biomacromolecules, vol. 11, pp. 2919-2926.
- Brigatti, M. F., Medici, L., and Poppi, L., (1996). "Sepiolite and industrial waste-water purification: removal of Zn 2+ and Pb 2+ from aqueous solutions," Applied Clay Science, vol. 11, pp. 43-54.
- Belbachir, S., Zaïri, F., Ayoub, G., Maschke, U., Naït-Abdelaziz, M., Gloaguen, J.-M., Benguediab, M., and Lefebvre, J.-M., (2010). "Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films," Journal of the Mechanics and Physics of Solids, vol. 58, pp. 241-255.
- Kaci, M., Sadoun, T., and Cimmino, S., (2001). "Crystallinity measurements of unstabilized and HALS-stabilized LDPE films exposed to natural weathering by FT-IR, DSC and WAXS analyses," International Journal of Polymer Analysis and Characterization, vol. 6, pp. 455-464.
- Solarski, S., Ferreira, M., and Devaux, E., (2008). "Ageing of polylactide and polylactide nanocomposite filaments," Polymer degradation and stability, vol. 93, pp. 707-713.
- Vasanthan, N. and Ly, O., (2009). "Effect of microstructure on hydrolytic degradation studies of poly (l-lactic acid) by FTIR spectroscopy and differential scanning calorimetry," Polymer degradation and stability, vol. 94, pp1372-1364.
- Wu, T.-M. and Wu, C.-Y., (2006). "Biodegradable poly (lactic acid)/chitosan-modified montmorillonite nanocomposites: Preparation and characterization," Polymer degradation and stability, vol. 91, pp. 2198-2204.
- Spinks, G., Brown, H., and Liu, Z., (2006). "Indentation testing of polystyrene through the glass transition," Polymer testing, vol. 25, pp. 868-872.
- Dhakal, H., Zhang, Z., and Richardson, M., (2006). "Nanoindentation behaviour of layered silicate reinforced unsaturated polyester nanocomposites," Polymer testing, vol. 25, pp. 846-852.
|
