ناپایداری مدی در تقویت‌کننده فیبر ایتربیومی

   [1]      E. Desurvire and M. N. Zervas, “Erbium-doped fiber amplifiers: principles and applications,” Physics Today, Vol. 48, pp. 56, 1995.##

   [2]      M. Bégin and B. Morasse, “Specialty Fiber-High-saturation-energy Yb fibers pump up pulsed fiber lasers,” Laser Focus World, Vol. 48, pp. 43, 2012.##

   [3]      M. Farries, et al., “Distributed temperature sensor using Nd3+-doped optical fibre,” Electronics Letters, Vol. 22, pp. 418-419, 1986.##

   [4]      Y.-Y. Fan, C.-C. Ye, C.-Y. Wu, and Z.-P. Cai. “High-power narrow-linewidth wavelength-tunable YB 3+-doped double-clad fiber lasers,” Proceedings of SPIE - The International Society for Optical Engineering 7134, 2008, 71342H,.##

   [5]      J.A. Alvarez-Chavez, et al. “High Power Er3+/Yb3+-Doped Fiber Laser Suitable for Medical Applications,” in AIP Conference Proceedings, 2006, 84-86.##

   [6]      C. Jauregui, et al., “Passive mitigation strategies for mode instabilities in high-power fiber laser systems,” Opt. express, Vol. 21, pp. 19375-19386, 2013.##

   [7]      D. Richardson, J. Nilsson, and W.J.J.B. Clarkson, “High power fiber lasers: current status and future perspectives,” Vol. 27, pp. B63-B92, 2010.##

   [8]      G. P. Agrawal, “Nonlinear fiber optics,” University of Rochester, Optics and A. P. Photonics 4th Edition, 2006.##

   [9]      S. Naderi, I. Dajani, J. Grosek, and T. Madden, “Theoretical and numerical treatment of modal instability in high-power core and cladding-pumped Raman fiber amplifiers,” Opt. express, Vol. 24, pp. 16550-16565, 2016.##

[10]      A. V. Smith and J. J. Smith, “Steady-periodic method for modeling mode instability in fiber amplifiers”, Opt. express, Vol. 21, pp. 2606-2623, 2013.##

[11]      J. Nilsson and B. Jaskorzynska, “Modeling and optimization of low-repetition-rate high-energy pulse amplification in cw-pumped erbium-doped fiber amplifiers”, Opt. let. Vol. 18, pp. 2099-2101, 1993.##

[12]       J. Li, H. Chen, Y. Chen, M. Chen, Y. Yang, X.  Jin, Z. Dai, and Y. Liu,‎ “Theoretical and optimized design of low-repetition-rate high-energy pulse amplification in multi-stage MOPA systems”, J. Opt., Vol. 12, pp. 115710, 2010.##

[13]      B. Upadhyaya, U.  Chakravarty, A. Kuruvilla, K. Thyagarajan, A.K.Nath, M.R.Shenoy, K.Thyagaraja., “Effect of steady-state conditions on self-pulsing characteristics of Yb-doped cw fiber lasers”, Opt. commun., Vol. 281, pp. 146-153, 2008.##

[14]      L. Xiao, P. Yan, M. Gong, W. Wei, and P. Ou, “An approximate analytic solution of strongly pumped Yb-doped double-clad fiber lasers without neglecting the scattering loss,” Opt. commun., Vol. 230, pp. 401-410, 2004.##

[15]       M. Liu, H. T. Zhang, P. Yan, M. L. Gong, C. Zheng , K. Meng ‎ “Dynamics of Yb-doped double clad pulsed fiber amplifier based on slow motion dynamic rate equations”, Laser  Physics, Vol. 22, pp. 1335-1339, 2012.##

[16]      L. Zenteno, “High-power double-clad fiber lasers," J. Lightwave Technol., Vol. 11, pp. 1435-1446, 1993.##

[17]      M. Davis, M. Digonnet, and R. H. Pantell, “Thermal effects in doped fibers,” J. Lightwave Technol.,‎ Vol. 16, pp. 1013, 1998.##

[18]      D. C. Brown and H. J. Hoffman, “Thermal, stress, and thermo-optic effects in high average power double-clad silica fiber lasers,” IEEE J. quant. Electron., Vol. 37, pp. 207-217, 2001.##

[19]      Y. Wang, C.-Q. Xu, and H. Po, "Thermal effects in kilowatt fiber lasers," IEEE Photon. Technol. Lett., Vol. 16, pp. 63-65, 2004.##

[20]      N. A. Brilliant, and K. Lagonik, “Thermal effects in a dual-clad ytterbium fiber laser”, Opt. lett., Vol. 26, pp. 1669-1671, 2001.##

[21]      J. Holman, “Heat Transfer”, eight ed., McGraw-Hill Publisher, New York, 1997.##

[22]      H. Icenogle, B. C. Platt, and W. L. Wolfe, "Refractive indexes and temperature coefficients of germanium and silicon", Applied optics, Vol. 15, pp. 2348-2351, 1976.##

[23]      D. B. Leviton and B. J. Frey, “Temperature-dependent absolute refractive index measurements of synthetic fused silica”, in Optomechanical Technologies for Astronomy. 2006, pp. 62732K.##

[24]      S. Naderi, I. Dajani, T. Madden, and C. Robin, “Investigations of modal instabilities in fiber amplifiers through detailed numerical simulations,” Opt. express, Vol. 21, pp. 16111-16129, 2013.##

[25]      K.R. Hansen, T.T. Alkeskjold, J. Broeng, and J. Lægsgaard, “Thermally induced mode coupling in rare-earth doped fiber amplifiers,” Optics Letters, Vol. 37, pp. 2382-2384, 2012.##

[26]      A. Kumar and A.K. Ghatak, “Polarization of light with applications in optical fibers”, SPIE press, Bellingham, Washington USA, 2011.##

[27]      K. D. Cole and P. E. Crittenden, “Steady-periodic Heating of a cylinder”, Mechanical & Materials Engineering,  Vol. 131, pp. 091301, 2009.##

[28]      K. D. Cole, J. V. Beck, ‎A. Haji-Sheikh, and B. Litkouhi, “Heat conduction using Green's functions, (Series in Computational Methods and Physical Processes in Mechanics and Thermal Sciences) 2nd Edition” Hemisphere Publishing Corporation, New York, 1992.##

[29]      K.R. Hansen, T.T. Alkeskjold, J. Broeng, and J. Lægsgaard, “Theoretical analysis of mode instability in high-power fiber amplifiers,” Opt. express,Vol. 21, pp. 1944-1971, 2013.##

[30]      M. Karimi, K. Jamshidi-Ghaleh, M. Amniat-Talab, A. Sepahvand, A. Shohani, “Study of Thermal Effects in Double Clad Ytterbium Doped Fiber Amplifier,” The 24th Iranian Conference on Optics and Photonics (ICOP 2018) and the 10th Iranian Conference on Photonics Engineering and Technology (ICPET 2018), 2018, 681-684, (In Persian).##

[31]      M. Karimi, K. Jamshidi-Ghaleh, M. Amniat-Talab, A. Sepahvand, A. Shohani, “Calculation of refractive index variation in fiber amplifier with ‎convection and radiation heat transfer from fiber surface ‎,” The 24th Iranian Conference on Optics and Photonics (ICOP 2018) and the 10th Iranian Conference on Photonics Engineering and Technology (ICPET 2018), 2018 , 677-680, (In Persian).##

[32]      M.-A. Lapointe, S. Chatigny, M. Piché, M. Cain-Skaff, and J.-N. Maran. “Thermal effects in high-power CW fiber lasers,” in Fiber Lasers VI: Technology, Systems, and Applications. 2009, pp. 71951U.##

[33]      A. Sepahvand, M. Karimi, A. Shohani, M. Amniat-Talab, K. Jamshidi-Ghaleh, “Coupled Mode Coefficient Determination in High Power Fiber Amplifiers,” The 24th Iranian Conference on Optics and Photonics (ICOP 2019) and the 10th Iranian Conference on Photonics Engineering and Technology (ICPET 2019), 2019, pp.405-408, 2019 (In Persian).##

[34]      C. Jauregui, H.-J. Otto, F. Stutzki, J. Limpert, and A. Tünnermann, "Simplified modelling the mode instability threshold of high power fiber amplifiers in the presence of photodarkening", Opt. express, Vol. 23, pp. 20203-20218, 2015.##

[35]      Y. Fan, B. He,  J. Zhou,  J. Zheng,  H. Liu,  Y. Wei,  J. Dong,  and Q. Lou, “Thermal effects in kilowatt all-fiber MOPA”, Opt. express, Vol. 19, pp. 15162-15172, 2011.##